Electronics Forum | Wed Nov 23 08:43:48 EST 2022 | charles_nguyen
I am having problem with plated hole-copper spacing. I don't know if the gap between plated hole and copper can meet the capacity of PCB manufacturers. My board have 0.5oz copper weight on outer layer and distance of 0.177MM between plated hole and c
Electronics Forum | Fri Mar 15 21:20:18 EDT 2024 | compit
Check out Yamaha - also old. A large number of parts (the same machines under the Assembleon, Philips brand), cheap feeders, many parts suppliers. Models from 2 to 16 heads, e.g. Emerald-X can accommodate 84 INDEPENDENT 8 mm feeders.
Electronics Forum | Mon Mar 18 09:04:46 EDT 2024 | carl_p
Sounds like your talking very low volume & component counts really... I would look at Panasonic AM100 for example - low cost, high flexibility but you would need multiple so you could pair it with another... Ideally we would need to understand your
Electronics Forum | Wed Mar 20 12:28:40 EDT 2024 | poly
The Fuzion HC will do that many parts depending on the tape width. 8mm is dual per lane, big ones can take up a lot of lanes. Our boards have that many parts and I use two machines (gx11 and a gc30). I think the Panasonic is probably a better option
Electronics Forum | Wed Mar 27 12:33:55 EDT 2024 | ttheis
Go used. We have quarter million dollar UIC machines we bought for $10k and they are amazing. Just need to be able to read manuals and be resourceful without factory support. There are independent service companies if you need help. Overall its been
Electronics Forum | Thu Apr 18 18:34:33 EDT 2024 | ahernand75
Hello SMTnet, I would like to know from you guys your experiences of how the use of X-Out boards impact your units per hour on your lines. There are different scenarios where some of you might have only one lane reflow oven and others may have 2 lane
Electronics Forum | Wed May 15 08:08:50 EDT 2024 | james2024
TON Honor Series-YT20S is a high-speed all-in-one machine, which breaks through the conventions of the placement machine industry, greatly improves the speed, accuracy and stability of the product, and supports customization of special requirements.h
Electronics Forum | Thu May 23 07:10:54 EDT 2024 | oxygensmd
As I see there is minimal capacity impact - because more panels on the line but nothing special. It is more question there are enough good fiducial for skipping-checking - at SiPlace it called as inkspot. It is important to have good operators who ca
Electronics Forum | Tue Oct 09 12:23:07 EDT 2001 | Mike Konrad
Hi Danial, Yes, you can use one cleaning chemistry for all paste types. There are many available chemistries from many manufacturers. The chemistries that I would recommend include: StencilWash Plus from Aqueous Technologies http://www.aqueouste
Electronics Forum | Mon Aug 12 09:40:53 EDT 2002 | itempea
Hi Antonio, you had some wonderful input from the previous mailers. They covered much of the technicalities. What I would like to point out is that if the line has 2 chipshooters and they only use one for you, you still pay for the second one since
