Electronics Forum | Fri Jun 26 19:59:07 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector 1. You need a fixture to insure the pins don't bend while inserting them on the board, coplanarity is a re
Electronics Forum | Fri Jul 02 09:54:02 EDT 1999 | John Thorup
| | | | We are wave soldering some fabs with a lot of unmasked trace area along the edges. The trace area is solid copper covered with tin / lead, no masking, no components along the edges, same on solder side and component side (goofy board design)
Electronics Forum | Fri Jul 02 10:06:17 EDT 1999 | John Thorup
| | | | We are wave soldering some fabs with a lot of unmasked trace area along the edges. The trace area is solid copper covered with tin / lead, no masking, no components along the edges, same on solder side and component side (goofy board design)
Electronics Forum | Thu Feb 03 12:17:03 EST 2000 | Doug Philbrick
I am looking for some Process related answers on the above mentioned connectors. Anyone with first hand experince doing PCMCIA cards that can answer questions on attaching the connector to the PWB I would greatly apreciate hearing from you. Please ca
Electronics Forum | Wed Aug 18 06:34:57 EDT 2004 | Bernard Mulcahy
Hi , Our hardware designer wants to introduce a board with a straddle - mounted SMT connector, AMP part number 84487-1 and FCI 71292-001. This is an 80 pin connector that slips over the edge of the PCB and has 40 SMT pads on either side (at least thi
Electronics Forum | Wed Jan 08 16:27:11 EST 2020 | rmitchell
We have a PCB with the dual sided connector that slides on from the edge and has leads on the top and bottom sides of the PCB. It has 20 leads on each side of the PCB with with about .8mm pitch. The PCB also has a gold grounding strip on the edge fo
Electronics Forum | Wed Jan 08 19:16:56 EST 2020 | spoiltforchoice
http://suddendocs.samtec.com/literature/em_tectalk8a_lr.pdf Even so its still a fairly manual process so I guess you really have to want to use this type of connector because its a whole process in itself and I bet the whole family is a special or
Electronics Forum | Fri Dec 08 14:35:28 EST 2006 | glynnhamer
We currently are building a pcb that has gold fingers, about 36 in a concave V overall shape from .275 on the outside edge fingers tapering down to .197 in the middle of the 2 inch span that plugs into a shelf connector. These fingers are on both sid
Electronics Forum | Mon Nov 27 22:01:25 EST 2017 | bibi11952
Hello SMTNet, We had received boards from our CM, some came with a Tin plated finish on the SMT hermaphroditic edge connector, while others came with Gold plated on the same connector. Tyco supplies both version and they apparently mixed up parts.
Electronics Forum | Wed Jun 04 00:28:27 EDT 2008 | chrispy1963
There are a couple of things that you can do. First thing to do is take a flashlight and shine it in the card edge connector of slot 2 and see if a passive component or any other part worked its way into that slot. This will cause multiple leads in
