Electronics Forum | Thu Dec 15 19:47:43 EST 2005 | Liza
Hi GS, You mentioned that polystyrene should be sealed by low method. We are currently using the ffg parameters for polystyrene monolayer dull finish carrier tape and AA cover tape. Are these considered low by standard? These are the parameters r
Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert
I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas
Electronics Forum | Thu Dec 15 07:15:22 EST 2005 | stefwitt
After re-reading your posting, Liza, I�m doing yet another correction to my reply. Are you using the same taping machine for all your components or could you narrow it down to one taping machine? Is it a fully automated taping process or more likely
Electronics Forum | Fri Dec 16 10:25:14 EST 2005 | GS
Hi Liza - polystirene monolayer (blend ?) could be sealed at less presure, ie 35-40 PSI. Temprature could be 165�-170�C. For sure after sealed you shoud make sure the sealing strength (peel strength)should meet min 15-25 N.(bet avg from 25 to 45 N)
Electronics Forum | Thu Dec 15 19:43:33 EST 2005 | Liza
Stefan - We are using an automatic sealing equipment and have several controls also. The particular machines used for processing these products could be narrowed down to 5 machines at most. The sealing temp, pressure and dwell time are checked on a
Electronics Forum | Tue Jul 13 05:21:04 EDT 2010 | bubbobbed
Guys, I've received complaints from customer that the chip is sticking on the cover tape or carrier tape when detape. Is there any possible that i can solve the problem by changing the cover tape or carrier tape?? some say the root cause of this issu
Electronics Forum | Wed Dec 13 08:28:37 EST 2000 | CAL
1)having the leader tape overlap and taped square is key. 2)making sure the Butt splice of the carrier tape is cut square and come together with no gaps 3) I would put a piece of yellow splice tape on the underside of the carrier tape to help hold th
Electronics Forum | Thu Mar 30 13:23:16 EST 2006 | russ
I agree with greg, after a teardown there should be leader tape left for the next load. Are your operators tearing it off at the end of the carrier tape?
Electronics Forum | Tue Mar 02 11:06:14 EST 2004 | Morris
I'm wondering what others are doing with splicing SMT carrier tapes when necessary. (e.g to join cut tapes etc) The system we have seems kind of clumsy and when a tape is spliced, often causes jams in the feeder anyway. Any systems or advice you can
Electronics Forum | Fri Mar 31 16:06:58 EST 2006 | GS
I think this can be of help when dialing with setting up feeders for product prototyping, where often we have to dial with a short quantity of components (often pieces of carrier tape w/o tape and cover leader) just enough to run (if lucky) those few