Electronics Forum | Thu Jun 19 05:14:18 EDT 2008 | sckee
Hi, Need help on the CCGA solderability criteria.I've actually run a NPI that using CCGA yet not sure whether the solderability is accepted or not. The alloy of the column is 80/20 and the surface of the solder joint is not smooth and shine. By chec
Electronics Forum | Tue Jun 04 12:33:57 EDT 2002 | dason_c
We use the diamond shape on the CBGA/CCGA only, all the PBGA are using the regular round shape.
Electronics Forum | Mon Apr 04 18:23:35 EDT 2005 | GS
Solder volumes is very important parameter to keep under control in order to get a good and reliable CCGA solder joint, and an automatic 3D paste volume inspection is strongly recommended practice to use. Questions: - what Column pitch do your CCGA h
Electronics Forum | Fri Sep 06 11:16:08 EDT 2002 | dason_c
To check any solder crack, open under the BGA/CCGA. I am using a destruction test to find out is it related to the reflow profile or the Fab issue. 1. Depense the Dye (I use Dykem Steel Red) under the device. 2. Cure the dye 3. Remove the device 4.
Electronics Forum | Fri May 26 02:22:18 EDT 2000 | Sal
Generally a good and safe option when selecting a printer, A rhobust machine with good process capabilities. We print anything from 0402's to CCGA's using proflow, as well as print adhesive with no problems. The 265 ranges from the MK1 TO Infinity mo
Electronics Forum | Sat Jun 21 23:15:07 EDT 2008 | mika
Also keep in mind that the CCGA column length tolerance is at minimum +/- 0.13mm from most part manufactures and they don't collapse in the same way as a BGA, therefore the paste height deposit could be critical in some rare circumstances. Board warp
Electronics Forum | Mon Apr 11 15:37:29 EDT 2005 | GS
For 1,27 mm Column Pitch, we set our process like this: - Stencil 0,20 mm If allowed also for other SMDs otherways some time 0,150 with step up stencil used only for CCGA area. - paste height min 0,175 mm - aperture 0,75 to 0,8 mm - paste volum
Electronics Forum | Tue Nov 01 15:26:43 EST 2005 | GS
Is it this your first experience of C-CGA RWK ? In order to approach a RWK of this kind of pakage it requires a capable process and clear operating procedure. In the past, the company who I use to work for, we rwkd plenty of this kind of CCGA. Earl
Electronics Forum | Mon Apr 04 22:07:15 EDT 2005 | Dhanish
Questions and answers - what Column pitch do your CCGA have ? a) 1,27 mm?b) 1.00 mm? 1.27mm - how are the PCB pad finisched ? OSP Enig? HAL? OSP - Are you using Clean or NC solder paste? Clean
Electronics Forum | Tue Apr 05 09:17:50 EDT 2005 | russ
We use 1:1 with an 8 mil stencil for these parts. Russ