Electronics Forum | Mon Nov 10 09:11:51 EST 2014 | rgduval
The centering jaws are made out of copper, I believe...and conductive. I'd suggest that the conductivity of the copper makes it a fairly poor source of ESD damage in a component. I have observed physical damage to components from the centering jaws
Electronics Forum | Fri Feb 17 06:16:52 EST 2006 | bwet
Dear Collegues: We recently commissioned a laser machining center that is used on a job shop basis for a variety of customer work. Does anyone have a recommended procedure for completing a machine capability study? How about a recommendation on
Electronics Forum | Fri Nov 08 11:10:36 EST 2013 | rgduval
I'm not completely sure what you're asking, but, I can say that I've placed these parts with MyData's and Philips machines. Pick in the center of the part, and place in the center of the outline, and the terminals should line up with the pads on the
Electronics Forum | Mon Jan 09 17:52:50 EST 2023 | duchoang
The reasons could be: -The pads size are uneven. Modify the pads size. -The part has not enough time for self-centering. Check and increase TAL. -Solderpaste not melted completely. Increase peak temp. -Solderpaste does not work well. Use alternate so
Electronics Forum | Fri Feb 25 17:25:05 EST 2000 | Brandy Ford
Thank you for your response Michael- I agree with you completely. Though there are fields for the employer to fill out, they are not required fields. Should we make them required? What job that you are interested in that doesn�t have a location
Electronics Forum | Fri Feb 25 17:25:05 EST 2000 | Brandy Ford
Thank you for your response Michael- I agree with you completely. Though there are fields for the employer to fill out, they are not required fields. Should we make them required? What job that you are interested in that doesn�t have a location
Electronics Forum | Mon Feb 22 15:44:42 EST 2010 | remullis
Just bought a used machine and everything was working fine and now the camera will not initialize. Powered down completely and rebooted, same thing. I powered down again moved camera to center of axis, it moves to the lower right hand corner which I
Electronics Forum | Tue Jan 03 14:35:40 EST 2012 | comando
Yes I have this tools and jigs but I can't to complete first calibation (Image camera Y Adjustment) I done all and the nozzle is in the center of display but the machine don't perform this calibration. the nozzle image in display look litle big than
Electronics Forum | Mon Jun 28 14:38:47 EDT 1999 | Michael Bryant
SMTnet.com, the gateway to electronics manufacturing on the Internet, recently performed two major upgrades to the Web site. The Calendar of Events and Career Center have been fully automated, allowing registered users to submit content directly to t
Electronics Forum | Thu Aug 04 15:07:30 EDT 2016 | sumote
I have seen a similar error on a Quad 4C machine. When setting up the parameters on a tray part there are several points of data you have to input. You have to teach where the center of the 1st part (and you have to know which corner your machine con