Electronics Forum | Fri Dec 04 09:09:46 EST 2009 | bandjwet
We are considering purchasing an MY-19 refurbished from the factory. We were not initially looking at this model but it became available. Are there any issues with this model. (We already have an MY-9 and are familiar with the MYDATA and their suppor
Electronics Forum | Thu Apr 07 11:39:48 EDT 2011 | remullis
My oven profile is 155,160,165,180,220,245,255,227 Cooling Zone 132/92. This is a 8 zone CV820 Technical Devices oven. My assy profile using Datapaq Q18 - Base on one probe feedback - Positive slope (7.09), Pos Slope Time (.45), Rise Time (1.17), Me
Electronics Forum | Mon Sep 21 00:11:14 EDT 2009 | darrenj
We have a TP9 with a centering motor issue. (TPSYS Ver 2.5.3) The error message F-MOT-SETDYN C/3 Upper endpoint outside limits is shown during C-motor initiation. I've looked in the service program and also the parameters in TPSYS but can find no m
Electronics Forum | Tue Sep 05 14:31:42 EDT 2017 | rgduval
Create a package, set the mechanical centering to the dimensions of the 8-DFN that you're trying to place, test the centering. Tweak the dimension that's failing. Shouldn't be too much of a problem. An 8-DFN package is nothing more than a rectangu
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Sat Jun 12 10:46:32 EDT 1999 | Dean
| Our company is experiencing cracked caps at our pick and place operations. The caps are being placed onto epoxy dots for subsequent wave solder operations. At present, be have set the pressure of the head at 2 in/lbs. This being down from manufac
Electronics Forum | Sun Jan 30 20:13:32 EST 2022 | chuckphd53
I have a SMT-460 machine that works pretty good for the most part. When placing parts I have an issue with the SOT-23 rotation 90deg. Using both Juki 503 / 504 nozzle it will pick and place all of the 0805 and 1206 resistors/caps just fine. I have 9
Electronics Forum | Mon Apr 30 09:55:50 EDT 2007 | rgduval
We're running an older TP9-U, and clocking in somewhere around 3000 cph, realistically. Placements, however, are very accurate. Works fine down to 0402's, high-pin count QFPs, etc. My -U doesn't do great on optical centering...it works, but it's a
Electronics Forum | Mon May 13 11:05:49 EDT 2013 | shankar2013
I have moved the MOT cards. The messages are still the same. Booster +25V is stable, The BM3 +25V indicator shows no +25V which means any of the feeds down the chain pulled it down. So basically once it is low the relays in the BM3 card will not latc
Electronics Forum | Mon Oct 21 11:05:57 EDT 2019 | tey422
With the given update you provided, that would rule out the nozzle tool issue. If the parameter looks fine, then the issue would be somewhere around the nozzle tool bank. Need to check open and close release. If the nozzle seats flush "not tilted" w
