Electronics Forum | Fri May 13 21:47:17 EDT 2022 | mikevb
I just received replacement XWB3 and 3PT1 boards. I swapped them out and it seems to have fixed that issue. Thank you all for the help!
Electronics Forum | Tue Jul 10 11:36:22 EDT 2007 | dyoungquist
Hi SMT Frog We are using an upgraded Mydata TP9-1 system to place 0402s. We do an electrical test plus mechanical centering and use the C14 tool. A few things we have observed/learned: 1) Is the machine not picking the part up out of the tape? Po
Electronics Forum | Sun Nov 01 21:01:26 EST 2009 | isd_jwendell
I'm at 6800 ft. The only issue I had was related to a PEM nut that was not packaged properly. There was a piece of K@pton tape that was not centered on the part and the tape would stick to the carrier. The vacuum on my machine would not allow me to
Electronics Forum | Sat Dec 17 02:15:25 EST 2005 | manyhats
Fastek, i believe your right something manual or semi will work great... don't waste time or money buying that fully auto printer, they all do that same Sh&t... i have 2 TP-11 and think you should be ok placing the 0402 using the C14 tool and mechani
Electronics Forum | Sat Jun 12 16:33:52 EDT 1999 | JohnW
| | Our company is experiencing cracked caps at our pick and place operations. The caps are being placed onto epoxy dots for subsequent wave solder operations. At present, be have set the pressure of the head at 2 in/lbs. This being down from manuf
Electronics Forum | Mon Jul 29 13:48:20 EDT 2013 | cyber_wolf
We have placed millions of DPAKS on our Mydatas without issues. Usually the crosshairs need to be just slightly to the right of the dimple when trimming. We do not use high centering force. Please tell us exactly what the error message is.
Electronics Forum | Wed Dec 22 17:49:06 EST 2021 | mihai_voivod
I have this part: 142-1711-801 (Emerson). It is an SMT/TH part. https://www.digikey.com/en/products/detail/cinch-connectivity-solutions-johnson/142-1711-801/9992851 I want to reflow the part instead of hand soldering and/or reworking the solder jo
Electronics Forum | Thu Jul 12 07:52:08 EDT 2007 | cyber_wolf
I agree avalancher. Your description is a valid point. But, I am still under the impression that the vac level is a separate issue. His original problem was 0402's missing off the board ,and weird measurements showing up when parts get rejected. I w
Electronics Forum | Mon Nov 13 12:17:58 EST 2017 | slthomas
Hi All, We have a new customer with a new design asking for us to leave the center VIP (8 mil drill) on a 9 ball uBGA (.5mm pitch) unplugged. What are my options should I be unable to convince them that this is going to be problematic? Obviously it
Electronics Forum | Wed Sep 23 08:19:52 EDT 2009 | rgduval
Check to see if there's a loose cable, or something, that's randomly setting off the light curtain. We occasionally have that problem with some of our flex or 12/16 mags in our TP9, where the tape take up clip is loose (nothing in that feeder) and i
