Electronics Forum | Fri Nov 07 06:45:13 EST 2014 | cot628
Has anybody had issues with the Mydata centering jaws causing esd and part damage. I understand we can lower the force on the components but ESD is my main concern. In the past I heard of companies testing the centering jaws because of this concern.
Electronics Forum | Mon Nov 10 09:11:51 EST 2014 | rgduval
The centering jaws are made out of copper, I believe...and conductive. I'd suggest that the conductivity of the copper makes it a fairly poor source of ESD damage in a component. I have observed physical damage to components from the centering jaws
Electronics Forum | Fri Nov 07 08:16:13 EST 2014 | cyber_wolf
We have placed billions of components with our Mydata's. No issues with ESD.
Electronics Forum | Fri Nov 07 18:14:17 EST 2014 | cot628
That is a lot of Mydata lines to place billions of parts.
Electronics Forum | Fri Nov 07 18:12:50 EST 2014 | cot628
This issue is coming from a customer. The customer demands that we do not mechanically center or test passive components, because of issues they had in the past. There has been a studies that it takes about 8-10 newtons to damage chip. Most of our pa
Electronics Forum | Mon Nov 10 06:54:19 EST 2014 | cyber_wolf
It's called running every day 3 shifts for 22 years. Anyway....My precise numbers aren't handy but lets just say a lot of parts were placed in that time. I would be pretty confident in saying that the centering jaws do not cause ESD damage on Mydat
Electronics Forum | Fri Nov 07 11:13:35 EST 2014 | dyoungquist
We have run Mydata machines for 10+ years with no ESD damage from the machine itself that we know of. Can you tell us how you have verified it is the machine causing the ESD damage? It seems to me the ESD damage would be far more likely coming from
Electronics Forum | Sat Nov 08 00:28:25 EST 2014 | padawanlinuxero
Hello We a Mydata and put all kinda of components with the midas unit, but never had problems with ESD, and some of them are very delicate parts, perhaps like our colleague said perhaps you should look at the trays or feeders that you are using, pe
Electronics Forum | Wed May 08 09:39:14 EDT 2013 | dyoungquist
Your centering jaws are likely okay. It's the 25V that runs the centering jaws that is having the problem. Could be the circuit that produces the 25V is having problems after warmup or maybe the motor that runs the centering jaws is going bad. Loo
Electronics Forum | Thu Aug 14 13:49:26 EDT 2014 | dyoungquist
Motor control MSETDYN -> Initiate axis C -> Centering jaws 156 -> Motor timeout Did not reach specified position Hardware problem Looks like you have something wrong with the movement of your centering jaws.
