Electronics Forum | Wed Nov 03 18:24:27 EST 1999 | Fred
How it measures a component? What it looks for? How it centers the component? How it destinguishes the leads from the body? Other info is just a added bonus!
Electronics Forum | Fri Oct 29 10:44:35 EDT 1999 | Doug Nebel
We have placed them before. You can only inspect the perimeter, but with the larger pitch in wasn't a problem. We also picked off matrix trays, but the BGA's we did had no center array. But if that type are on T&R it should work as well.
Electronics Forum | Tue Aug 31 12:53:15 EDT 1999 | jseagle
Just what the subject says. If you are what type of machine are you using, is it mechanical or vision centered? What is the reject rate? Thanks for any help. James
Electronics Forum | Tue Aug 17 09:11:15 EDT 1999 | Mario
Looking for users of the Emerald pick and place.Comments on that equipment would be greatly appreciated. QFP and micro-BGA placement, idiot proff software etc. We just got a good offer to use that equipment for our training center instead of our pre
Electronics Forum | Fri Jul 23 04:29:38 EDT 1999 | MK
Can anybody recommend low capacity PCB manufacturing equipment for labaratory or research/designers center. Output 2-10 sqr. m. per shift; required working space 30-100 sqr. m. Spent too much time looking fr this. Thanks in advance.
Electronics Forum | Sun Apr 25 11:37:51 EDT 1999 | Earl Moon
| We are just starting to manufacture a PCB with a .039" fine-line PBGA. We are currently seeing voids, mainly in the center, that are as much as 45%. We also intermittently see the corner balls of the PBGA smaller than the center balls. We are using
Electronics Forum | Mon Aug 03 12:33:19 EDT 1998 | Dew Lolly
I and I imagine most of you, are embroiled in the turf war going on between CIMBridge and Unicam. Since Fuji is squarely in the center of this issue I would imagine that many of you are wondering which way to lean. I'm wondering if we are not going
Electronics Forum | Wed May 06 23:46:31 EDT 1998 | Thomas Nisbet
We want to insert LED's on .100 center's with a UIC Rad 2. The LED must have plastic standoff on the leads before they are inserted. Are there any tape & reel machines that will put the standoff on the LED and then put the component on tape & Reel. A
Electronics Forum | Mon Jun 01 12:31:35 EDT 1998 | Don Spicer
| We want to insert LED's on .100 center's | with a UIC Rad 2. The LED must have plastic | standoff on the leads before they are inserted. | Are there any tape & reel machines that will | put the standoff on the LED and then put the component | on ta
Electronics Forum | Mon Apr 20 11:55:28 EDT 1998 | Eric Jenkins
Component Technologies is an independent programming center. We can help with all programming needs, from high volume to prototype. Visit our website www.componenttech.com Our feel free to call 1 800-881-0780. Eric Jenkins
