Electronics Forum | Fri Oct 20 11:44:40 EDT 2006 | sliebl
Anyone using Circuit Cam? We too are looking for a gerber/centroid converter. I used the demo of GraphiCode GC-PowerPlace and it works, but seems cumbersome. It's also difficult to substantiate the large capital cost of these programs without being v
Electronics Forum | Fri Oct 20 14:35:44 EDT 2006 | pms
We use CircuitCam for MyData off-line machine programming, it's wonderful and I don't know how we did without it. But, it's pricey.
Electronics Forum | Mon Feb 24 12:41:18 EST 2014 | mi
Depending on what X-Y centroid / CAD data you need, there are different SW I've used to do the job. If you need PCB gerber "artwork" (rounds, rectangles, lines, squares,...geometric figures), you can use GraphicCode GC-Place & such - load the gerber
Electronics Forum | Fri Sep 19 16:25:43 EDT 2008 | davef
While it might not be what you prefer to do, but rather than converting directly from Mydata to Panasonic, can you simply use a Gerber converter to produce centroid information and then use the centroids to program your Panasonic machine? Search the
Electronics Forum | Sun Feb 16 05:57:02 EST 2014 | alexeis
Hi, From our experience, Gerber files are accompanied by IPC type files. These files usually have extensions: IPC, NET, 356. We have developed products that are designed to help in programming part of the SMT machine, based on these files beyond sta
Electronics Forum | Sat Feb 15 15:01:06 EST 2014 | dexter11233
At my company we have to capture centroid data from gerber information on almost a daily basis, so tinkering and toying with quicker and easier methods of getting the job done are fairly common place with us. As stated by Richard Larue UniSofts cad
Electronics Forum | Wed Jan 22 10:35:38 EST 2014 | unisoft
_a class=roll > href="http://www.graphicode.com/GC-PowerPlace" > target="_blank"_http://www.graphicode.com/GC-Power > Place _/a_this does, I had a dabble and while it > does seem quite capable the learning curve is > quite steep and I'd wager th
Electronics Forum | Wed Sep 17 12:37:57 EDT 2008 | stepheniii
Panapro can be set up for the centroid data in any order. You won't be able to load the centroid data straight into the machine though. At one time I used Unicam to program a mydata. Then we got a panasonic line. The panarep said we could configure
Electronics Forum | Fri Sep 19 10:20:43 EDT 2008 | stepheniii
You are making sense. And no you can't go from centroid data to a program at the machine automatically. You can type in the numbers if you want but the machine won't turn centroid into a placement program. Don't you have PanaPro? I thought there w
Electronics Forum | Tue Sep 16 12:39:41 EDT 2008 | stepheniii
You will have to make new programs for the Panasonic. (afaik) But you can use the Mydata programs as centroid data for the Panapro. Load it into Excell using space as the delimiter. Copy column B onto column A. cell A1, move cells up. Sort by column
winsouce.jpg)
