Electronics Forum | Tue Jul 05 03:51:12 EDT 2005 | Rob
& Never forget the 3 golden rules: 1) Make sure the cow doesn't have horns. 2) Make sure it IS asleep. 3) Check out the field in daylight BEFORE you go to the pub.
Electronics Forum | Mon Jul 04 10:14:55 EDT 2005 | Paul
We need to purchase a pick and place machine. We are considering a Mydata My12 or My19. I would appreciate any comments concerning these machines, are they reputable, have you had any problems etc. Thanks!
Electronics Forum | Wed Jul 06 06:56:21 EDT 2005 | kadaba
i suggest you send me the email off books. i am interested in it and what configuration you have and the wish price
Electronics Forum | Wed Jan 17 18:00:10 EST 2007 | dyoungquist
My company runs an older TP9 machine that has had a few problems due to the old age but their tech support has been VERY good. I would recommend Mydata to anybody.
Electronics Forum | Thu Jul 07 07:27:10 EDT 2005 | buchi79
Are you buying nozzles from UIC or other vendor? By the way, what is the component you rejecting? Is it happening to random component or specific one?
Electronics Forum | Wed Jul 20 22:46:41 EDT 2005 | nozzles
we can supply nozzle for varies machine brand,such as fuji,sanyo and so on. welcome to inquiry that!thanks vera http://www.hkenterprise.com/szcomfaje tel:86-755-28091605 ext.805 eskimy1001@gmail.com
Electronics Forum | Wed Jul 27 12:50:59 EDT 2005 | mnguyen
You may want to look at which spindle that is dropping the nozzle and check the O-ring on the spindle head. It's probably bad, cracked, or broken. Replace it and that will fix it
Electronics Forum | Tue Jul 05 05:23:34 EDT 2005 | kentes
We have one set MPM AP25. Its prestop position is not stable,but stop position is stable. It often occur "time out" alarm when load PCB.Which one can help us.
Electronics Forum | Wed Jul 06 10:22:04 EDT 2005 | PWH
At times we have had this problem with our AP25 due to one of the conveyor belts slipping. Load a PCB and check to see that both conveyor belts are running at the same speed. If not, tighten the one that is dragging. Hope this helps.
Electronics Forum | Thu Jul 07 08:29:51 EDT 2005 | chunks
Check to make sure your conveyors are parallel. Also verify the the width to make sure the belts are supporting the board properly. Sounds funny, but I see this more times than anything else.
