Electronics Forum | Thu Jun 21 00:35:21 EDT 2018 | reckless
I just bought this GSM for $1500: https://www.youtube.com/watch?v=mYExLDwlJLc&feature=youtu.be It has 1 flexjet head and OS2. I need to buy 15 8x2mm feeders and some 12mm. Do I buy pneumatic or electric? My service tech says electric is a waste o
Electronics Forum | Tue Mar 13 18:13:41 EDT 2018 | dleeper
Placement force usually refers to the amount of force an SMT nozzle applies to a part when placing it. You want enough force to push the component onto the paste but not so much that you damage the part. Some specialized applications involve placing
Electronics Forum | Mon Mar 12 13:51:08 EDT 2018 | cyber_wolf
It is BS. Solder is either liquid or it isn't. Getting it hotter doesn't make it more liquid. Its very easy to prove them wrong. Have them create a profile with the bottom heater turned down. Run boards and see how many parts fall off. You create
Electronics Forum | Mon Mar 26 19:22:22 EDT 2018 | tey422
First of all, shouldn't allow SMT operators to edit/create recipes, only grant access to the well-trained only. You will put yourself at risk if you don't have good process rule of oven recipes. Newer oven models should come with software that has m
Electronics Forum | Mon Mar 12 16:28:06 EDT 2018 | monikak
Hi All. I found this pleace becouse I looking gor your help. I have a P&p samasung SM482 with this waring : Origin position of st1f-w Axis looks heving been changed. Check Axis. Conveyor is moving stright to the sensor. Its stop about 1mm before and
Electronics Forum | Thu Mar 15 18:18:36 EDT 2018 | maustin
Yep, checked the nozzle (that was my first port of call). Had a look at it under our microscope, and also swapped it out for another nozzle to be sure. The problem still exists. You can set the theta speed, but only to Fast, Medium or Slow. I've
Electronics Forum | Thu Mar 15 18:21:26 EDT 2018 | maustin
Cheers. I have a suspicion its an error with whatever part of the machine measures shaft rotation, but the grub screw thing is an easy one to check and eliminate. I'm only guessing from what I can see, but it looks like its setting the component at
Electronics Forum | Thu Mar 15 00:53:06 EDT 2018 | dpalombo
We are looking for a domestic contract assembler that has experience placing Zierick pins onto IMS boards. Specifically we need to place the A1, A2, A3 and A4 pins of any length. Information on the pins can be found here: http://www.zierick.com/pa
Electronics Forum | Sun Mar 18 20:15:06 EDT 2018 | stephenj37824
Thanks so much for the reply. I had looked at Juki but must have missed that model. I see what you are saying about the dispensing. I was looking at the Mycronic solder jet system the My700 I believe. I have watched a few videos detailing the pros an
Electronics Forum | Wed Mar 21 09:05:53 EDT 2018 | stephenj37824
We are doing 2D on the printer. I got what seems to be a great price on the AIMEX III. I haven't heard back from Yamaha and Juki has emailed but no call yet. Fuji has a service person 3 hrs south of our location so it doesn't seem extremely far. I wi
