Electronics Forum | Mon Feb 24 20:37:01 EST 2003 | davef
Key Food and Drug Administration [FDA] Compliance Guidelines are in: * Blood/Biotechnology * Cosmetics * Drugs * Food * Medical Devices * Positron Emission Tomography The medical device industry adheres to the rules of Good Manufacturing Practice (G
Electronics Forum | Fri Aug 24 06:11:00 EDT 2012 | tk380514
Hi everyone, In my past i have used a titanium putty to fix and modify Durostone CFR767 SOLDERING PALLETS, could anyone recommend any other substance that can be used for simple repairs for these pallets? Br: Peter
Electronics Forum | Wed Aug 29 08:36:51 EDT 2012 | tk380514
bumping!!!!
Electronics Forum | Wed Dec 12 20:28:29 EST 2012 | davef
OSHA regulates eye protection under 29 CFR 1910.132 I've had inspectors confirm that eye protection was ANSI Z87.1 compliant, but have never had anyone question the level of protection provided by side shields.
Electronics Forum | Tue Oct 07 22:15:12 EDT 2014 | padawanlinuxero
How to avoid /reduce warpage in long length PCB & > _1.6MM THICK PCB. You need to put it in a fixture or pallet to run it in the reflow oven, most common material use here is durostone for the pallets that we run in the reflow oven, we use Durosto
Electronics Forum | Wed Jan 29 13:47:32 EST 2003 | Jacob
We are currently storing small amounts of our conformal coating waste. Recently someone asked how we would dispose of the material and I hadn't the slightest idea because this is a new process for us. I started to look into proper disposal for the
Electronics Forum | Wed Nov 19 20:24:15 EST 2008 | davef
There are a number design safety standards for X-ray inspection systems, such as ANS N537 and CFR21. Further, each state will have it's own version of these regulations. We agree with Jerry's post that suggests that your equipment supplier is the b
Electronics Forum | Mon May 30 09:11:15 EDT 2011 | davef
3a ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity lim
Electronics Forum | Mon May 06 21:40:40 EDT 2013 | davef
ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity limits
Electronics Forum | Tue May 30 21:28:48 EDT 2000 | Dave F
A heads-up for yall ... 40 CFR 372 - Under Section 313 of the Emergency Planning & Coomunity Right-To-Know Act (EPCRA) of 1986, the US EPA is proposing a reduction in the reporting limits for lead and lead compounds from the current limits of 10,000
