Electronics Forum | Wed Sep 19 10:23:38 EDT 2012 | cbeneat
We Have 3 Vitronics XPM2's. I know nothing about any other manufacturer, but Vitronics has been extremely reliable. 2 Shifts 5 days a week for 6 years, and have never replaced a blower. Have had to change a few overtemp switches, and have had a fe
Electronics Forum | Thu Oct 04 17:02:40 EDT 2012 | ekki511
Hallo Jeff thanks a lot for your answer. Yes the error was the bad driverboard. The daughterboard AC . We changed and the mashine is running. Unfortunately we have now a problem with the Handheldkeyboard.The joystick is not working. The same problem
Electronics Forum | Mon Sep 24 18:03:43 EDT 2012 | rmazenha
Hi, i am using AIM 264-5 No Clean flux for soldering alpaca pieces on PCB boads, but i am having problems: poor filling and no solder. I am using SAC 305 lead free solder. I have tried to change flux pressure, time, ammount as well solder speed an
Electronics Forum | Wed Sep 26 15:04:09 EDT 2012 | kahrpr
The QSA30 is basically a Samsung CP40 with a few changes. For an older machine the programming is pretty good. it can do array boards and has an import feature for XY data. Tts been about 7 years since I ran one. Its a pretty solid machine.
Electronics Forum | Tue Oct 02 10:30:10 EDT 2012 | eniac
Difference in pick height from paper and embossed reel (typically) is 0.2 mm. Try to change your pick height and place height (different type of capacitors have a different height: for 100 nF 0603 and for 4.7 uF 0603 it's a big difference!). Can you
Electronics Forum | Wed Nov 07 06:47:52 EST 2012 | leeg
I am having issues whereby a zone on my heller oven goes through a stage whereby it never seems to stabilise, I have checked the blower motor, changed the SSR and my next step will be to check the heater element, does anyone have any idea what type o
Electronics Forum | Mon Nov 26 13:07:16 EST 2012 | rway
Running in series is best for less change-over, depending on how many components you use. But, as Dave stated, if you have the capacity on your machines to run your product on one machine, then you can do that and get twice the throughput. Series wi
Electronics Forum | Fri Dec 07 08:29:26 EST 2012 | juggalo
I agree with you sarason, but just last week the owner of our company walked up to the wave solder while an operator was performing maintenance and the operator threw a bar of solder into the bath and solder splashed into the owners eye. Still no one
Electronics Forum | Thu Jan 03 10:32:38 EST 2013 | beej
I was wondering if any of you fine folks had a trick to changing out nozzles for a Pillerhouse Jade Handex. The tool they gave us when we purchased the machine is inadequate at best. I have tried heating the nozzle up, to no avail. Just wondering if
Electronics Forum | Sat Jan 19 22:42:16 EST 2013 | ngineer
Ok, I managed to figure it out, and this is simply for anyyone having this issue. The issue was that the selected board or board folder did not reside in the selected board directory. the answer was to hold LSHIFT at startup to skip the autoexec of
winsouce.jpg)
