Electronics Forum | Mon Jan 06 16:19:32 EST 2020 | richardcargill
haven't tried the MINT as it won't let me get that far !! Swapping the Eproms with card 1 and changing the identifier will let it get to the 'Press SYSTEM key' part of the startup though, then it fails on card 1 instead of 0 so I'll give that a try i
Electronics Forum | Thu Jan 09 18:26:21 EST 2020 | spoiltforchoice
Much like DWL we have multiple stencils that are really quite old (~2003 and still in use) and are perfectly OK. In fact I don't think we've ever worn one out, higher volume designs are far more likely to get a layout change before the stencil gets
Electronics Forum | Mon Feb 03 13:17:26 EST 2020 | rgduval
When I had a MY500, I was told the only way to program it was through the interface software. The reason given was because of the algorithm/processing. You couldn't even do on the fly changes at the machine. I imagine they've continued that schema
Electronics Forum | Wed Jan 29 03:11:18 EST 2020 | tamasmagyar
Barcode/scanner configuration can still lead to wrong parts mostly when changing reels. The root cause is still the line operator, because instead of scanning the newly set-up reel, he/she scans the old reel because 'it's easier' for them. I have wor
Electronics Forum | Mon Feb 10 10:23:53 EST 2020 | emeto
Solder paste has stencil life time - if you go over it means you should change it. If you print boards in front and keep them for too long before reflow, the flux is still evaporating, so you are not mitigating the risk. Paste also likes room tempera
Electronics Forum | Wed Feb 12 10:30:40 EST 2020 | majdi4
we have already taken this idea into consideration but as a plan b .. like i said before, we are producing large series of cards, then the lights reflow pallet will disrupt the normal production process (storage in the racks, convoys, machine screen
Electronics Forum | Mon Feb 24 00:59:47 EST 2020 | sssamw
=0.08g/mm2, make it less than 0.08. And maybe the connector gravity center location is a cause also. If no machine issue (vibration, wind,etc), and you cannot change the design/material then you can use SMT glue to fix the connector during reflow.
Electronics Forum | Wed Feb 12 14:14:42 EST 2020 | alvarez94
I am running a MYDATA MY19 machine.the problem is that the first 2 hours after turning on the machine it does not work throwing the following error: "transducers do not agree". After approximately 1 or 2 hours the machine starts working normally. T
Electronics Forum | Fri Feb 21 12:19:13 EST 2020 | richardcargill
People in general are fairly resistant to change ( I've found ) - however, we're looking at the same move to LCD cameras shortly. My main apprehension is the lack of stereo vision ( and associated depth perception ) when reworking under it but I'm s
Electronics Forum | Mon Apr 06 17:08:30 EDT 2020 | tima
Try swapping XWB board that is on top of X-Wagon. Have you try that? All signals go thru there. Another thing can be those 2 ribbon cables that are behind of X-Wagon. How long ago did you change them? What I would do is to move X to different positio
