Electronics Forum | Sat Feb 19 17:10:06 EST 2022 | assuredtech
First off, Fuji machines aren't that simple i.e. changing the CPU could actually make matters worse. There are jumpers, DIP Switches and related data to consider before doing something like swapping cards. Swapping is a shotgun approach but sometimes
Electronics Forum | Fri Feb 25 13:48:50 EST 2022 | quartermeter
I get this error on a new program. old programs work fine till I put this connector in the program. I've redone every part and still get this error. When I change the height on anything the Z =xxxx gets less or more. Thanks Jim
Electronics Forum | Mon Apr 18 11:45:04 EDT 2022 | dontfeedphils
If you're 100% certain you have the correct nozzle for this package you could check to see if your PnP machine has an option for "Auto Adjust Pickup Position" or something along those lines and try changing it (if it's currently on, try turning it of
Electronics Forum | Wed Jun 01 04:31:30 EDT 2022 | ttheis
This is a 0603 ceramic capacitor. Thanks for the tip; this helped us figure out the issue. We reduced lighting and saw an improvement but still had issues. Looking closer at the rejects (see pic#2 in original post) there were some shiny spots on the
Electronics Forum | Tue Jun 14 15:59:25 EDT 2022 | mikevb
Thanks! I just needed a response like that. I will do all that, and if it's still an issue, I'll change the x wagon encoder right? There are three encoders on the x wagon though? The white one on the x carriage, the white one on the x belt drive mo
Electronics Forum | Sun Aug 21 15:35:22 EDT 2022 | zadir
good afternoon, please tell me, maybe someone has encountered a problem on the juki 730/740 machine.we have a 24 volt 10 amp power supply broken on it (it stopped turning on completely) we changed it, but now stanou can't find the zero point, he come
Electronics Forum | Fri Aug 26 10:44:37 EDT 2022 | gfe
In the Mirae machine we can give an individual delay for each component, in this case the delay in Z is in all of them, the nozzle stays on top of the component for a long time, this happens in any program, could we have accidentally changed some con
Electronics Forum | Tue Sep 06 01:32:25 EDT 2022 | poly
I've got two Genesis machines (GC30 and GX11) that I bought used. The PWC on one is disabled, and if I enable that axis the machine will tell me it can't find or initialise that axis. I tried swapping the board 48904905 from the working machine to th
Electronics Forum | Thu Oct 13 18:20:14 EDT 2022 | proceng1
I also believe it is the cause of the issue. I guess you could make a fixture that clamps the board flat. Then you'd have to change the reflow recipe. How was the recipe created? Did you actually profile a populated board or just use a recipe that
Electronics Forum | Tue Nov 01 14:38:45 EDT 2022 | glasscake
Did the tray changer use to work on this machine? was it ever disabled and uncoupled from the machine? If you have an old data disk or backup disk of the machine try restoring to that. There is also a jumper inside the wiring harness to include the
