Electronics Forum | Tue Nov 01 14:38:45 EDT 2022 | glasscake
Did the tray changer use to work on this machine? was it ever disabled and uncoupled from the machine? If you have an old data disk or backup disk of the machine try restoring to that. There is also a jumper inside the wiring harness to include the
Electronics Forum | Tue Nov 01 18:41:10 EDT 2022 | griinder
misc. Info), and the profile in component editor under the other tab. Default is 20. There is a way to change numerous values at once, but it takes a hidden click and password to do. First verify both places for a part are set to 20. Is it possible
Electronics Forum | Fri Dec 16 17:48:43 EST 2022 | kumarb
Hi. May I ask the factory default password used on the Ekra X4 printer for the PCB parameter changes? Believe it is some permutation of '4113' or similar. We had an accident recently with a drunk driver run through our building. In the process, lo
Electronics Forum | Tue Feb 14 16:31:16 EST 2023 | yannick_herzog
Hello, we have increased problems with a product with the paste pressure. Here we can see pads that are not completely printed. We suspected that the squeegee speed was too fast and the amount of paste on the stencil was insufficient. Unfortunately
Electronics Forum | Tue Jun 06 13:36:12 EDT 2023 | calebcsmt
This is where I think Hanwha/Samsung sorta sits apart from the others, as the maintenance and upkeep is almost zero. One of our SM482s has been going 10 years now, with essentially the only maintenance other than cleaning and filter changes, being g
Electronics Forum | Thu Jul 20 13:36:43 EDT 2023 | nickadams
After working with the CS400-E and instruction files associated with it, I've developed a Python program to more effectively change the bin location. This program is intended to be used after creating the first .DNL file. The user will also need to a
Electronics Forum | Sun Aug 13 10:49:23 EDT 2023 | kirill
Usually, for big connectors like this, you can use a red smt glue under the connector with a dispenser. If its not possible, you can use the same red glue and put a small dot on the side of the connector after reflow, and heat it a bit with blower, 1
Electronics Forum | Thu Oct 05 13:48:20 EDT 2023 | tommy_magyar
Whatever the cleaning process is or will be, after cleaning make sure you check on X-Ray for any solder balls/debris in microphones. This is a friendly reminder to check, unless you want to receive customer complaints. Been there, seen that - we went
Electronics Forum | Fri Dec 08 17:31:17 EST 2023 | madisreivik
Changed camera, flicker is gone. But cannot calibrate nozzle centers with the narrow camera, error all time I checked buffer image, brightness and contrast is SAME as with wide camera. Center of camera is roughly aligned using nozzle, its better
Electronics Forum | Mon Jan 29 12:18:46 EST 2024 | oxygensmd
For low volume high mix an EKRA will be much better. Slower but much better on GUI which makes products changes faster. Operators can handle the machine easier and way better in effeciency. EKRA have really simply internal sturcture which makes servi