Electronics Forum | Fri Sep 02 11:26:50 EDT 2011 | steffenr
Overkill for sure! Program to BOM: Shouldn't have to verify the program to the BOM once it's been verified unless there is a change. Feeder to BOM" There should be some type of instruction that specifies that part goes on what feeder and where the
Electronics Forum | Wed May 02 09:25:09 EDT 2012 | tbouslog
Our company has recently changed the way our cage gives our SMT Department their parts to try to better control inventory. SMT now instead of recieving reels recieves strips with only 2-20 extra parts depending and the size/cost of the part. Does any
Electronics Forum | Tue May 06 11:14:40 EDT 2003 | k_h
Sorry, I did misunderstand. My opinion would be: Assuming nothing else used feeder space, like tray changers, camera's, nozzles, ..... and assuming 1 slot = 1 8mm feeder position, I think 70-90 slots would be reasonable. A reasonably priced feeder ta
Electronics Forum | Wed Aug 10 10:14:18 EDT 2011 | lisalau
Below is a cheating experience from one of my friends. To all SMT friends___a cheating experience to share with you We made payment to Autento Electronics in Singaporen on OCT 30th,2009 to purchase Siemens Feeders,and they agreed to make shipment w
Electronics Forum | Tue Dec 05 01:10:51 EST 2006 | ____
Dude - Keep away from the oven, you have sniffed to many fumes. Magnets aren't listed in the parts list, sacrafice an operator until someone fesses up!!!
Electronics Forum | Wed May 14 09:36:54 EDT 2008 | d0min0
as most of our components are described in AML list, we can't play with that so much... so we focus on preparing the line tools/materials before the change (paste, spatulas, test pcb) - and Yes all the dressing for Juki is ready, for TCM most of the
Electronics Forum | Tue May 17 16:46:52 EDT 2005 | davef
Most placement machine equipment suppliers offer software for line balancing. What's with Fuji? Fujitrax is a system developed in order to attain high levels of "progress management, quality management & traceability" over several SMT lines, throug
Electronics Forum | Mon May 24 16:08:43 EDT 2021 | robl
Can you have the SMT lines or feeder carts as "stock locations" on your system and issue them to that location? then at least when you go to your pick list you'll know where it is. That's assuming you can do this quickly.
Electronics Forum | Thu Jun 03 01:26:06 EDT 2021 | deanm
This may seem off the wall but I've seen it work in the past. It is a visual management system without the need for barcodes or spreadsheets. Obtain quantities of different colored clothespins. When a reel is taken out of inventory, attach a colored
Electronics Forum | Wed Jan 18 15:21:58 EST 2006 | adlsmt
FYI, if you are using 13" reels, for 8mm parts, you need a different feeder with a larger reel holder. If you get the larger reel holder and if you are using quick change carts, you need the cart for that type of feeder as they also make one that doe
