Electronics Forum | Tue Aug 21 19:24:15 EDT 2012 | rway
Checksum will work if all your doing is analog/passive testing. Checksum systems do not have digital test capability. I would recommend a Teradyne z18xx system. We use 8 of them in our plant and have been for years. Used, these systems range from
Electronics Forum | Mon Jan 07 10:20:47 EST 2008 | remullis
I am looking into purchasing a used TR5300 and was wondering if anyone with experience on this model could tell me if you have the capability of importing programs from the older TR3100 dos based programs into the TR5300 windows based interface witho
Electronics Forum | Mon Jul 10 04:34:47 EDT 2006 | aie
Anyone using cencorp TR2101? Would like to know the max panel size that this model can handle, please email to me at "autento@singnet.com.sg"if you have any idea. Thanks! Regards
Electronics Forum | Thu Oct 04 21:39:44 EDT 2012 | jeffr
Are you saying that the buttons on the Joystick work, but the Joystick lever for XY is not working?
Electronics Forum | Wed Oct 10 12:22:08 EDT 2001 | Kevin
Cal, There are several suppliers of cover tape materials that do not require heat to activate the adhesive. 3M and Advantek are likely the leaders. There are relatively few T&R machines that can handle both heat and non-heat applications - as Chri
Electronics Forum | Fri Oct 29 10:44:35 EDT 1999 | Doug Nebel
We have placed them before. You can only inspect the perimeter, but with the larger pitch in wasn't a problem. We also picked off matrix trays, but the BGA's we did had no center array. But if that type are on T&R it should work as well.
Electronics Forum | Thu Oct 02 18:10:34 EDT 2003 | jersbo
we do a 2 person verification as well.. and record who changed and who verified.. Extra reels are setup before the run to minimize machine downtime..
Electronics Forum | Thu Oct 28 23:04:34 EDT 1999 | Micah Newcomb
Has anyone out there tried placing BGA's with a Fuji IP2? Fuji says flat out no way but I think we can if we get them in T&R.
Electronics Forum | Fri Oct 03 11:26:31 EDT 2003 | radney
We have been through several stages of this journey. We had no verification initially, migrated to two person verification (with reel initialing) and finally to electronic verification. Each of these steps has given us a dramatic improvement in our
Electronics Forum | Sun Oct 18 11:48:50 EDT 2009 | Rul
Problems found are the machine frequent freeze suddenly and produce error message when homing the machine: servo devices failed ... Action taken. Change the pc with another working machine. result= same problem happen. check the fuse at circuit of t
winsouce.jpg)
