Electronics Forum | Fri May 14 11:24:00 EDT 1999 | Chrys Shea
| Looking for a reasonably priced portable device to do strength test(shear/twist)on glue cured Cap/Res. Any suggestions? Thanks | My torque watch came from Waters Manufacturing, Inc. A div of Talley Industries. Longfellow Center, Wayland Mas
Electronics Forum | Tue Jun 01 12:57:52 EDT 1999 | John Sims
I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test metho
Electronics Forum | Mon May 10 15:02:37 EDT 2004 | davef
There's no such specification. Not should there be. Shear tests [in our opinion] are senseless, because: * Solder joint strength in pull/shear varies with lead geometry, solder volume, lead metal/metallization, and the way the test is done. * She
Electronics Forum | Wed Oct 06 22:55:14 EDT 2004 | davef
Your customer is correct. Components should not fall a board during a reasonable drop test. A shear test poorly represents a drop test. A drop test represents a drop test very well. If you want to proceed with shear testing, search the fine SMTne
Electronics Forum | Sun Jan 11 12:03:51 EST 1998 | Bob Willis
As a basic guide the minimum spec you should look for is 500g you should achieve a force on most chip parts of 800-1000g. Parts are lost on wave soldering due to no material, poor curing, poor surface adhesion and poor handling. Its not the wave sold
Electronics Forum | Thu Feb 15 19:41:38 EST 2001 | davef
What do you mean by "But after performing temperature cycle test, the former aging rate (from the shear strength ) seems faster than the latter."? Comments are: I can't recall having heard the term "precipitation hardness" [not that that means anyt
Electronics Forum | Fri Aug 05 14:38:50 EDT 2011 | bandjwet
Does anyone know of a vendor able to perform ball shear testing services per JES stds? Thanks! BWET
Electronics Forum | Wed Jun 02 06:53:44 EDT 1999 | Earl Moon
| I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test met
Electronics Forum | Mon Jun 07 11:21:38 EDT 1999 | Brian Wycoff
| | I need to perform shear tests on components that have been glued prior to wave soldering. Can any one recommend a shear tester and some standardized info on testing? We have had problems with poor glue bonds and would like to implement a test m
Electronics Forum | Mon Dec 17 08:41:45 EST 2001 | davef
Search the fine SMTnet Archives to develop background on this topic.
.gif)
winsouce.jpg)