Electronics Forum | Mon Oct 28 08:05:41 EST 2002 | Bob...
Not saying anything new here. I agree with all the comments posted. I have worked in the industry for over 20 years and have experience on all but Mydata. Which machines are you looking at? Fuji CP3’s were too maintenance hungry, CP4.3’s bullet pro
Electronics Forum | Wed May 31 10:39:33 EDT 2006 | grantp
Hi, We actually tried to get major parts of our line from the same supplier, however each supplier is good at some parts of the line, and not others. We went with Soltec oven and wave, which work well, and have not had any issues, plus DEK printer
Electronics Forum | Fri Jul 21 12:05:41 EDT 2006 | Chunks
Do the math first. 10,000 boards a month means 440 boards a day (roughly, and not including weekends). Do you plan 2 shifts or only one? If one, you need to produce a board about every minute if you work an 8 hour shift. If all 110 parts are on on
Electronics Forum | Sun Jun 18 13:07:12 EDT 2006 | mika
Please specify your needs. If you want to use a Fuji CP6 ship-shooter for chip placement on a pcb that are already glued before in an earlier process; the answer is yes. But the CP-6 itself can't handle the glue process, since it is a pure placeme
Electronics Forum | Sat Aug 10 10:57:23 EDT 2002 | finepitch
> A/cph, then you need a second chip shooter. Then each chip shooter will place B/2 parts and possibly catch up with the pick&place machine. If the line has 2 chipshooters and a pick&place, it will be pretty hard to use the one unused chipshooter fo
Electronics Forum | Fri Jun 12 15:29:51 EDT 2009 | grantp
Hi, We just had delivered one of these and it's incredible. It's an amazing machine, and watching it load such a large board totally accurately, from end to end is amazing. Apparently we took delivery of only the second machine to ship in the world
Electronics Forum | Fri Mar 16 11:52:31 EST 2001 | J.D. of Panasonic
Ed, You certainly are ready for some equipment. I noticed in your message that you mentioned cost three times. So it is a very big issue to you. What everything depends on is where you see your company going in the next few years. Do you want
Electronics Forum | Mon Sep 13 10:55:44 EDT 1999 | K3 Equipment
| Okay guys (and my fellow lady lurkers), I am trying to determine WHAT the segmentation is for the products in the pick and place industry. | | For example, I know in screen/stencil printing, there are manuals, there are semi-automatics, mid- and h
Electronics Forum | Mon Oct 31 12:04:05 EST 2005 | erokc
bobpan, thanks for the reply. I currently have a Quad 100 with no vision, well it had vision but is blind now and the vision system is not supported. Anyway, I use it for my own production. I can leave it set up for my product runs. Technology ch
Electronics Forum | Thu Jun 21 22:04:18 EDT 2001 | davef
This is my attempt at beating the "Fuzzburg 7" translator used on the SMTnet Forum that mashes everything it sees. Below the next paragraph are three paragraphs,each with a common numering sequence, where each paragraph represents the columns of a t
