Electronics Forum | Tue Jul 13 05:21:04 EDT 2010 | bubbobbed
Guys, I've received complaints from customer that the chip is sticking on the cover tape or carrier tape when detape. Is there any possible that i can solve the problem by changing the cover tape or carrier tape?? some say the root cause of this issu
Electronics Forum | Fri Aug 04 05:10:57 EDT 2000 | Dougie
Hi, We use a mixture of plastic tape carriers and paper tape carriers for placing chip components. We are experiencing a problem which I know is a problem across the industry...when using the plastic carriers, the chip components stick to the tape c
Electronics Forum | Mon Feb 21 03:56:34 EST 2005 | abhirami
Agree with Davef. Smaller the chip, more the static charge. I used to see this even with normal chips. Get an ionizer blow. It should solve your problem. May be switch to antistatic tape if affordable.Regards. GV
Electronics Forum | Sat Feb 02 08:55:55 EST 2002 | davef
I'd don't believe that the reels need to be ESD protective material. The carrier and cover tape have resistivity and materials specifications. Start with EIA-481. In past threads on SMTnet, we have discussed problems in picking components that wer
Electronics Forum | Mon Sep 13 21:18:29 EDT 1999 | Dave F
| Hi, | | Recently encountered missing components problem at the SMT process. | Among 13 chip components from the same part number mounted on the board, only 4 ( located in a same row and next to each other) were missing after post reflow. Checked t
Electronics Forum | Tue Sep 14 21:56:34 EDT 1999 | KEVIN SIMPSON
| | Hi, | | | | Recently encountered missing components problem at the SMT process. | | Among 13 chip components from the same part number mounted on the board, only 4 ( located in a same row and next to each other) were missing after post reflow. C
Electronics Forum | Wed Sep 15 03:11:33 EDT 1999 | Charles Stringer
| | | Hi, | | | | | | Recently encountered missing components problem at the SMT process. | | | Among 13 chip components from the same part number mounted on the board, only 4 ( located in a same row and next to each other) were missing after post r
1 |