Electronics Forum | Thu Oct 05 17:05:36 EDT 2000 | JAX
These types of foil kits work just fine as long as they are used before expiration. Scraping off the epoxy coat gets a little tough on fine pitch pads and etches. I have always like to use a solder sample board to retrieve my bits & pieces from whene
Electronics Forum | Wed Aug 09 19:14:15 EDT 2006 | Board House
Our Manufacturing policy regarding welds is as follows. 1) Inner layers - depends on Core thickness and line width. Our shop will not do any welding on core thickness less then 5 mils. or line width less then 5 mil. Good AOI practices reduce the a
Electronics Forum | Mon Apr 17 19:44:20 EDT 2000 | Dave F
Ashok: Well, your customer probably has a good reason for wanting you to send them boards without holes in the solder mask. What is their goal for the mask capabilities after you get do reworking the boards? * Cosmetic surface coat? * Performance t
Electronics Forum | Thu Nov 16 18:41:17 EST 2006 | John Fisher
Unidec repairs of industrial electronics specializing in the surface mount (SMT) and through-hole circuit board equipment, robotics, vision systems and general automation. Plese see our website at http://www.unidec.com of call toll free at 888-701-00
Electronics Forum | Fri Mar 16 10:04:41 EDT 2012 | davef
We'd repair a drop board like this. Here's what our old friend Jeff Ferry said is a published article ... When boards lose their edge: when the corner of a circuit board breaks or is damaged, the problem cannot be ignored by Jeff Ferry One of the m
Electronics Forum | Mon May 09 12:55:58 EDT 2016 | rgduval
What kind of epoxy do you guys use for repairing PCB pads? We've been using the stuff you can get from CircuitMedic, but, it's rather expensive, and is usually one-time-use (as you don't use a whole lot of it). It's a two-part epoxy, so, once you'v
Electronics Forum | Fri Oct 04 11:34:42 EDT 2002 | Bob Willis
Some additional comments from a paper may be of interest. Baking Printed Circuit Boards - Why and How Baking printed boards prior to conventional and surface mount assembly should not be necessary. Often boards are baked for historical reasons; in
Electronics Forum | Mon Jan 19 09:49:20 EST 2004 | davef
Not as such. Choices are: 1 Cut and epoxy some board foil from your board fabricator. 2 Sacrifice part a pad repair kits from the likes of: * Engineering Lab 905-785-1982 * Circuit Technology Center 978-374-5000 * General assembly suppliers catalog
Electronics Forum | Thu Dec 03 13:24:12 EST 1998 | Russ M
| | | Does anyone have any information or experience with the use of conductive epoxy in leu of solder. I have a unique application that might lend itself to this technology. I am looking for manufacturers, printing, curing and reliability info. | |
Electronics Forum | Wed May 07 09:31:28 EDT 2003 | davef
We use uV Dymax glue for thermocouple attach sometimes, but don't like the remainder [anal] and loosing attach, sometimes. Roger Saunders, President Saunders Technology, Inc; said: PRO: � These products are easier to use than high temperature solde
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682