Electronics Forum | Fri Nov 05 14:47:35 EST 1999 | Russ Cutler
We recently came to a cross roads... We have historically baked out ALL of our circuit cards, with a 2 fold purpose 1) to dry the part marking ink, and 2) to eliminate any moisture, which could result in measling further in the process of assembly.
Electronics Forum | Wed Nov 10 09:42:05 EST 1999 | Boca
Generic fabs should not require baking. Some special cases like teflon and flex circuits take moisture very well, they often continue to require a trip to the oven. Best wishes, Boca
Electronics Forum | Mon Nov 08 11:11:16 EST 1999 | John Thorup
Believe it! Although it might be necessary in certain rare cases, and as Ray says, as a bandaid, to routinely bake your boards is a mistake. For much more info, search the IPC technet archives over the last few weeks. It was a popular thread
Electronics Forum | Fri Nov 05 21:22:34 EST 1999 | chartrain
Amazing in today's technology that people still bake because "that's the way we've alawys done it". Baking is a band aid for poor manufacturing of the PCB. Moisture can become trapped between the layers during buildup. This moisture when it contacts
Electronics Forum | Fri May 31 10:35:46 EDT 2002 | dason_c
I think that the IPC spec only apply to the MSD. I had a paper from Lucent and forwarded by Francois Monette, please aware that the first 2 hours, the moisture doesn't bake out from the assembly/component and result show that it is increase the weigh
Electronics Forum | Fri Jul 30 09:43:44 EDT 1999 | C.K.
| We are having a process related problem with pullup resistors on a controller card which has a I960 micro-processor. | The controller monitors signal inputs and it's own resources then blinks a LED to indicate its working. The problem is that after
Electronics Forum | Sun Jul 25 08:54:37 EDT 1999 | Tom Gervascio
| We are having a process related problem with pullup resistors on a controller card which has a I960 micro-processor. | The controller monitors signal inputs and it's own resources then blinks a LED to indicate its working. The problem is that after
Electronics Forum | Mon Jul 26 10:25:12 EDT 1999 | Boca
| | We are having a process related problem with pullup resistors on a controller card which has a I960 micro-processor. | | The controller monitors signal inputs and it's own resources then blinks a LED to indicate its working. The problem is that a
Electronics Forum | Mon Jul 26 14:14:51 EDT 1999 | Steve Gregory
| | | We are having a process related problem with pullup resistors on a controller card which has a I960 micro-processor. | | | The controller monitors signal inputs and it's own resources then blinks a LED to indicate its working. The problem is th
Electronics Forum | Wed Apr 06 04:18:03 EDT 2011 | emmanueldavid
TK, Hope you got it right only for this round of assemblies. Well, passing through a Reflow belt is not an ultimate process to dry circuit cards & take out moisture from Solder finished layers. First of all, if the packs were not unsealed (even s
Midwest Circuit Technology provides Carbide Router Bits and End Milling Cuters for use in PCB Depaneling equipment. We have over 35 years of supplying tools and machining experience in drilling, Routing, Test Fixture manufacture.
114 Barrington Town Square
Aurora, OH USA
Phone: 13309956900