Electronics Forum | Tue Mar 07 21:19:50 EST 2000 | Van Hoang Dinh
I have few problems below, 1.I had problem with clean glue stencil at the midle of the process and after the process. 2.Very hard to Fix the bridging on the (close pin) connectors through the wave. Anyone can help on this. Thanks Van
Electronics Forum | Tue Mar 07 21:19:50 EST 2000 | Van Hoang Dinh
I have few problems below, 1.I had problem with clean glue stencil at the midle of the process and after the process. 2.Very hard to Fix the bridging on the (close pin) connectors through the wave. Anyone can help on this. Thanks Van
Electronics Forum | Thu Mar 09 20:48:30 EST 2000 | Dave F
Van Hoang: Welcome to SMTnet!!!! Regarding your problems: 1. Cleaning glue: Check the SMTnet archives. For instance, a recent thread was: cleaning glue off of stencils - pr 13:41:43 03/03/2000 2. Bridging on the wave: Bridging on the wave h
Electronics Forum | Thu Mar 09 20:48:30 EST 2000 | Dave F
Van Hoang: Welcome to SMTnet!!!! Regarding your problems: 1. Cleaning glue: Check the SMTnet archives. For instance, a recent thread was: cleaning glue off of stencils - pr 13:41:43 03/03/2000 2. Bridging on the wave: Bridging on the wave h
Electronics Forum | Fri Mar 03 13:41:43 EST 2000 | pr
Is it o.k. to clean my glue stencils in the same IPA stencil cleaner I use for solder paste? Also if anyone with experience in stenciling glue can lead me away from first time pitfalls I would appreciate that as well. thanks in advance
Electronics Forum | Fri Mar 03 13:41:43 EST 2000 | pr
Is it o.k. to clean my glue stencils in the same IPA stencil cleaner I use for solder paste? Also if anyone with experience in stenciling glue can lead me away from first time pitfalls I would appreciate that as well. thanks in advance
Electronics Forum | Fri Mar 03 14:08:55 EST 2000 | Michael Parker
Your best answer for determining cleaning method is to contact your stencil supplier and follow their recommendation. Periodic inspection of your apertures (using microscope, or minimum 10x magnification) would also be a good idea to make sure that g
Electronics Forum | Fri Mar 03 14:08:55 EST 2000 | Michael Parker
Your best answer for determining cleaning method is to contact your stencil supplier and follow their recommendation. Periodic inspection of your apertures (using microscope, or minimum 10x magnification) would also be a good idea to make sure that g
Electronics Forum | Wed Mar 08 09:32:57 EST 2000 | Dane Stokes
We use loctite to print with before begining testing on printing we asked loctite for the best cleaning solvent for there product. loctite had there own solvent that was designed to break down the propertys of their glue mix. Contact glue supplier an
Electronics Forum | Wed Mar 08 09:32:57 EST 2000 | Dane Stokes
We use loctite to print with before begining testing on printing we asked loctite for the best cleaning solvent for there product. loctite had there own solvent that was designed to break down the propertys of their glue mix. Contact glue supplier an
