Electronics Forum | Tue Jan 22 09:21:30 EST 2013 | cyber_wolf
Why cant you use alcohol ? Some stencil cleaners use alcohol....
Electronics Forum | Wed Feb 26 03:43:40 EST 2003 | alwil
We use an alpha metal stencil cleaner and was curious to find out what types of solvents and cleaners were used out there. It takes about 350-400 litres of fluid. I would be interested if there is something water based we could use. What types of ste
Electronics Forum | Thu Oct 16 10:54:02 EDT 2003 | honarar
We want to put an inline cleaner at the end of our reflow oven. should we be concerned about temp drop between the exit of the oven and inlet of the cleaner. does anyone know of a standard
Electronics Forum | Thu Oct 16 10:54:04 EDT 2003 | honarar
We want to put an inline cleaner at the end of our reflow oven. should we be concerned about temp drop between the exit of the oven and inlet of the cleaner. does anyone know of a standard
Electronics Forum | Thu Oct 16 18:10:50 EDT 2003 | Gabriele
Before entering the cleaner, the board should reach almost temperature of first pre-wash module (are you using DI water washing machine?), if water cleaner, normally the temp of prewash spry is set from 45 C� to 55 C�. (or it could be 10�C higher, bu
Electronics Forum | Thu Oct 16 18:11:19 EDT 2003 | Gabriele
Before entering the cleaner, the board should reach almost temperature of first pre-wash module (are you using DI water washing machine?), if water cleaner, normally the temp of prewash spry is set from 45 C� to 55 C�. (or it could be 10�C higher, bu
Electronics Forum | Tue Jan 23 02:46:48 EST 2007 | Stephen- SMT engineer trainee
Which stencil cleaners are RoHS compliant and cost effective? (We are currently using IPA for stencil cleaning, but there are some problems.So, we suggest to use VIGON SC 200?Is it good for stencil cleaning? Or any other suggestions?)
Electronics Forum | Mon Aug 30 14:40:20 EDT 2010 | jrr3434
I'm looking into buying a closed loop batch cleaner. I was wondering what the cost of ownership would be. I'm assuming that the filters would be the biggest expense. I would probably be running about 200 boards per week. Any info would be appreciat
Electronics Forum | Tue Sep 07 12:57:00 EDT 2010 | jrr3434
Thanks for the info mike. How well do these batch cleaners work with densely populated through hole boards that were solder with no clean flux? Is there a problem with water getting trapped under large capacitors? I'm using kester 959t for flux on b
Electronics Forum | Tue Jan 08 13:37:23 EST 2013 | mpolak
Hello, I'm looking to buy the stencil cleaner. Could you please advise what sort of options, parameters etc I should be focusing on? Thanks Marcin
winsouce.jpg)
