Electronics Forum | Wed Sep 07 21:58:21 EDT 2005 | smartasp
Hi Steve Will try your sugestion and C. Thanks. Smartasp
Electronics Forum | Tue Jun 21 17:16:51 EDT 2022 | throwingparts
Is your facility climate controlled? We had issues at low humidity.
Electronics Forum | Mon May 01 17:29:25 EDT 2000 | Joe
Hi, We have a climatic controlled assembly area, with a constant temp of 22 deg C and a relative humidity of 40 - 50 %. What I would like to ask is how should I approach a situation when the humidity starts to decrease to below 40%. The situation I'
Electronics Forum | Wed May 04 04:31:44 EDT 2005 | siverts
What is the MS-level and floor life of the critical components (should be written on the MSD-bag)? What is Your climate condition in the production area (%RH, temp.)? Are you doing this inspection on every board or is it enough to do it on the first
Electronics Forum | Tue Aug 28 06:17:11 EDT 2007 | jgrootkoerkamp
I have problems with blowholes during the wave soldering process. I already find out that the stock time between reflow and wave is the most important. The longer the boards are in stock the more blowholes we have. We don't have a climat controlled
Electronics Forum | Fri Oct 13 10:35:06 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Electronics Forum | Fri Oct 13 11:55:23 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Electronics Forum | Tue Aug 13 11:16:56 EDT 2019 | slthomas
My first and only thought is how old are the parts? Strange things happen to some materials over time, especially if they're stored in environments without significant climate control.
Electronics Forum | Thu Mar 08 01:19:16 EST 2001 | Mike Moninger
The environment essentially defines the need for coating. "Inside" may mean inside a men's locker room with attendant high humidity or inside a climate-controlled clean environment. Conformal coatings offer protection against moisture, fungus, chemi
Electronics Forum | Mon May 31 19:20:50 EDT 1999 | Raeto Zryd
I have difficulty to convince my management to air-condition our manufacturing facilities. The room temperature fluxuates from 8 deg.C in the morning to 25 deg. C in the afternoon. The PCB topside temperatures in the reflow oven and wave soldering ma
