Electronics Forum | Fri Mar 22 14:21:14 EDT 2024 | carl_p
Clean it then?
Electronics Forum | Fri Mar 22 16:25:01 EDT 2024 | carl_p
Faulty flow sensor in that case
Electronics Forum | Fri Mar 22 15:52:58 EDT 2024 | vsuresh
After cleaning also same issue, replaced by new nozzle also same issue,not cleared
Electronics Forum | Thu Jun 23 15:20:49 EDT 2016 | caurbach
Could be a partially clogged nozzle. Try disassembling the nozzle and thoroughly cleaning it. If that doesn't fix it, see if there are any blockages in your plumbing. If you can't find any blockages, it could be your pressure sensor.
Electronics Forum | Mon Aug 29 13:34:58 EDT 2016 | mhanrahan
We had this issue with our old MV 150. This was usually due to clogged/dirty or bent nozzles, or clogged dirty filters on the vacuum supply to the head.
Electronics Forum | Thu Jul 06 08:22:04 EDT 2000 | David Chapman
Have you thought about stencils for glue? We stencil all glue boards quite succesfully. No CAD no clogged nozzles, much faster speed aperture designs are fun to work with. Just a thought for an alternative. All the companies mentioned also will advis
Electronics Forum | Wed Nov 29 01:09:17 EST 2006 | Guess
I would suggest checking the feeder, MVF and MSR are both turret type and dont have the capability auto pik adjust in y. Y offset pick up would lead to : 1. Over turn component. 2. Missing component. Turret sequence is pick, recognize an
Electronics Forum | Tue Jan 10 18:46:30 EST 2023 | cyber_wolf
Check your 500 nozzles under a microscope very closely for tip damage, clogs, or un-smooth spring action. 1 bad nozzle can make it seem like you have a chronic problem. If you have knock off nozzles (chinese reproductions) that can be an additional i
Electronics Forum | Mon Oct 21 09:58:28 EDT 2002 | cnoonan
We hare having an issue with our chip shooters misplacing or not placing parts all together. We have traced it back to our adhesive machine. We are using both single and double dot nozzles. I feel that the biggest problem is excessive amounts of g
.gif)
