Electronics Forum | Tue Jun 22 13:35:40 EDT 1999 | Jason Gregory
I am need of info regarding the tape cutter blades for a Sanyo/Universal 4760 HSP chipshooter. Ours are gone and beyond repair. I have found that the blades are the same as on the 4765 HSP. Part nos. are UPPER-6300056280 LOWER-6300056273 Please he
Electronics Forum | Tue Jun 22 13:37:56 EDT 1999 | Jason Gregory
| I am need of info regarding the tape cutter blades for a Sanyo/Universal 4760 HSP chipshooter. Ours are gone and beyond repair. I have found that the blades are the same as on the 4765 HSP. Part nos. are | | UPPER-6300056280 | LOWER-6300056273 |
Electronics Forum | Wed Sep 21 10:40:18 EDT 2005 | PWH
Splicing for us has been a rough go as we haven't really found a tool that works well/fast. We have a few different machines = different feeders. They all react different to a splicing "style". The best so far is a crimp tool that crimps a brass s
Electronics Forum | Mon Mar 05 18:04:43 EST 2007 | stepheniii
If it might go in a clean room you will want to look at if the system cuts the paper tapes. In the old days there was no vacuum at the cutter and around the machine would accumulate white dust from the machine cutting the tape for each component. The
Electronics Forum | Fri Jun 03 09:37:59 EDT 2016 | sumote
Same here. Buy it by the 2-pack at Staples. If the tape does not get used often we pull off about 5 inches and discard before we use it. The exposed tape between the cutter and the roll, and 1 rotation around the outside of the roll attracts dust and
Electronics Forum | Fri Sep 28 23:22:19 EDT 2007 | anne0405
SMT splice product(splice tape,splice cutter,splice tool,extender,stencil clean rolls and so on)with best quality and resonable price. pls visit http://www.khj.cn email:sales@khj.cn
Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,
Electronics Forum | Tue Aug 03 17:45:43 EDT 2010 | swag
I used to wrench on those all the time! I really should be more help to you but it was a few years ago... A few more things to check - clean the line sensors on the back of the machine. Check to make sure you don't have a feeder that is allowing t
Electronics Forum | Thu Feb 24 11:18:20 EST 2005 | Alex
Many parts falls around the tape cutter no mather the size or type. Also many times the machine misses some picks. But when doing a placement test with a single dummy part, 99% good.
Electronics Forum | Wed May 08 10:05:42 EDT 2002 | Claude_Couture
Maybe the problem is not the cutter, but the arm that advance the tape in the adjacent feeder gets actuated at the same time as the active feeder. line-up a feeder in pickup position visually, then turn the crank until the roller or feeder advance me
.gif)
