Electronics Forum | Tue Apr 12 23:44:51 EDT 2016 | cmarasigan
Try to increase or set to 100% the Lead Check Side (%) for every QPF part data.
Electronics Forum | Tue Apr 12 21:43:50 EDT 2016 | cmarasigan
There is an auto teach of QFP component for CM402 wherein machine can auto recognize number of pins, pin pitch. Just make sure on your part data you have selected the right reference part (Ref: 171)for QFP. For manual component recog; 1. Set Comp si
Electronics Forum | Fri Mar 25 22:03:30 EDT 2016 | annabella
YANGLING SMT CO.,LIMITED Since 2005, 11 years experience China SMT pick and place parts supplier Paticipate NEPCON Shenzhen(2009-2015) Lots of CM402 nozzles on sale. Any interested in please follow me: Youtube: https://www.youtube.com/watch?v=5vvi80
Electronics Forum | Sat Feb 11 09:58:20 EST 2012 | cbeneat
I have a question for any Panasonic CM 402/602 users. We run Cree XPE/XPG/XPC LED's on our machines, and have struggled for years with the lights sticking in our nozzles. We have two types, I believe both designed by Cree, one picks the light up by
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Thu Nov 29 15:52:53 EST 2007 | jmelson
Some other machines are a lot simpler. Here's how the Philips (mady by Yamaha) CSM84 works. Smaller tape (8 and 12 mm) feeders are all mechanical. A plunger on the head pushes a lever on the feeder at the same time the head comes down. First, the
Electronics Forum | Wed Feb 27 04:23:13 EST 2008 | fujillews
Hi It is best to fit the VGA camera for 0201 parts make sure your software is high enough..above v1.33 although you can place without but no so good. 0.4mm tapered nozzles are best. 0201 feeder the locator base in increased by aprox 0.3mm and the ind
Electronics Forum | Fri Sep 15 15:57:34 EDT 2006 | Steve
What kind of connector is it? How does the manufacturer recommend processing their part? We've had quite a bit of experience using Tyco 'Mictor' connectors, with their inserter. We paste both sides of the board then drop the board on the inserter. A
Electronics Forum | Fri Nov 30 18:27:32 EST 2007 | jmelson
This doesn't help the original poster any, but does the Quad have any sensing of what is going on in the feeder? On the pneumatic or mechanical Philips feeders, if the tape jams in the feeder for some reason, the head just keeps tapping the lever an
Electronics Forum | Tue Apr 17 21:05:06 EDT 2001 | davef
So, we�re talkin� �bout the smaller end of a "large" paper clip after it�s unfolded once, eh? In keeping with your "nothin� up the sleeves" full disclosure, I�ll bet you�re feelin� a little sheepish about not tellin� us about: * Antenna pad dimen
winsouce.jpg)