Electronics Forum | Wed Jan 26 08:27:12 EST 2005 | pr
I am using the AVK and am VERY pleased with it. One thing to keep in mind is incoming tape and reel has to be pretty exact. The parts are going into a feeder and if the width varies too much you'll have problems. After we got control of Tape and reel
Electronics Forum | Thu Sep 10 17:10:00 EDT 1998 | Steve Gregory
Hi Tim, 8-mil huh? Boy, that's getting down there...you know, placing 8-mil is one thing, but printing solder paste on 8-mil pitch is another. Most of the time when I've seen 8-mil pitch on a board it's been attached with hot-bar...but I guess
Electronics Forum | Sat Sep 12 10:47:00 EDT 1998 | Jon Medernach
I am aware that the Intel processor is available in a 0.012" leadframe, as a TAB product ( which can be excised and placed with may P&P machines but I do not know of any 0.008" leadframes, Bumped Die are at these pitches and frankly I would bet dime
Electronics Forum | Wed Dec 21 10:27:39 EST 2005 | Rob
Also is it really better to go with a company that has 3 times as many engineers if none of them are anywhere near you? Also Bigger companies tend to have an accountants view on spares holding (ie they wonder 'round like rainman muttering bad, ver
Electronics Forum | Thu Jan 26 16:21:04 EST 2006 | robls
We are a contract manufacturer in South Africa and have been running with Samsung equipment since 1999. To date we have 8 machines running 18 hours a day and have had nothing but fantastic service from these machines. We started with the old CP30 mac
Electronics Forum | Thu Jan 26 13:12:19 EST 2006 | Erik
We just bought a SM320 an will receive it next week. We had 3 days of user training this week and from my point of view it is a very good machine. Really easy to use and very fast and accurate. On our testboards we achieved *realistic* speeds of 10.0
Electronics Forum | Sat Dec 17 15:46:28 EST 2005 | Csabee
Samsung SM320 don't have sensor for recognizing component. Only using Fly&Fix camera. In first time the korean samsung service engineer advised me (3,7light settings for chips and the machine generated many dumps, sometimes 50 or more per day. But n
Electronics Forum | Wed Jan 01 13:03:06 EST 2020 | ramsus
hello experts i want to calculate my target of cph i have a panasonic line composed of three machines 1.CM602L 4 HEADS 12 SHAFT 2.CM602L 4 HEADS 12 SHAFT 3. CM602L 2 HEADS 8 SHAFT + 2 HEADS 3 SHAFT Best regards
Electronics Forum | Thu Oct 22 04:45:32 EDT 2015 | myleb
Can you explain: 1. Is mc running normally before problem happens? 2. Any abnormality happens prior to problem? 3. Can you still check input/out put in machine adjustment meno? 4. Can you see all information in Ringload information? 5. If set bad be
Electronics Forum | Thu Oct 22 05:36:58 EDT 2015 | myleb
Hi Nhel, It's quite strange problem here... 1. The voltage check: please supply power voltage. Inside machine (BF) there is a transformer, please make sure the voltage setup is correct. 2. In Ringload information, please see the 12V and 24V, is it
