Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Sat Jan 09 20:00:04 EST 2021 | oxygensmd
I had similar issue on S20 two times. The portal2/gantry2 have camera image? Have working camera system - if other camera ok, PCB camera will be the problem. Have camera screen on BE/Components camera? Have iCOS PC working. - Check the camera conn
Electronics Forum | Mon Jun 17 03:09:37 EDT 2024 | roetestify
Calibrating the Panasonic NPM-W2 HMI display is crucial to ensure precise touch sensitivity and accuracy. Here's a step-by-step guide: Begin by accessing the setup or configuration menu on the Panasonic NPM-W2 HMI device. Look for an option specific
Electronics Forum | Tue Jul 15 17:28:10 EDT 2008 | proy
We have an SPM which has a faulty touch screen (worn out?? who knows). ELOtouch does not have a replacment for this old screen. Has anyone here had any luck replacing it with something else, OR replacing the computer with another, upgrading the soft
Electronics Forum | Sat Jul 19 19:23:48 EDT 2008 | proy
We got it working; We replaced the old video card with an older ISA video card to get the display to work. Then we removed the ELO touchpanel ISA card, which cleared an IRQ conflict with the mouse on COM 1. Running mouse drivers AND VGASPM.EXE fro
Electronics Forum | Tue Nov 20 21:13:32 EST 2018 | sabeti
Hi there, I have found another sensor and replaced it but the display still shows as "Insert Screen and Retry". Do you know what the issue would be? Thanks
Electronics Forum | Sat Nov 07 18:38:32 EST 2020 | enzik
Hello to all, The Fuji GSP III screen printer was working well yesterday. This morning, the machine turned on and the display screen was showing nothing. I went to the back of the machine and reset one of the VM1152A. The display screen is now showi
Electronics Forum | Mon Feb 08 10:24:44 EST 2021 | bobpan
These machines are known for this. Keep reseating the chip on the display board. The mylar display looks pretty bad and may need replaced.
Electronics Forum | Wed Aug 13 09:11:19 EDT 2008 | rgduval
Shane, We're assuming that the software is similar to our Heller 1800. We're also assuming that the oven has thermocouple ports, and that you have the thermocouples to plug into them. From the screen that displays the zone data, there should be a
Electronics Forum | Wed Mar 11 15:16:27 EDT 2020 | sportsradar
Here is a few pictures. IMG_20200311_151400 shows the screen on the LC everything is fully booted on the LC before the machine is turned on. IMG_20200311_151350 shows the Siplace 80S15 waiting on LC IMG_20200311_151320 this screen is displayed when
