Electronics Forum | Tue Mar 25 02:53:25 EDT 2008 | vincentng68
We sell fuji spare parts. We have the nozzle holder. If you want, please e-mail me.
Electronics Forum | Fri Feb 02 13:27:59 EST 2007 | jdengler
Daxman, Make sure the clutches engage the nozzle holders properly. Sometimes the holders do not slip into the recess of new clutches as easily as they should. Jerry
Electronics Forum | Tue Jan 30 10:20:20 EST 2007 | mee
you need to clean the holders
Electronics Forum | Mon Mar 24 06:40:57 EDT 2008 | robi
Hi we have some in stock but not many thanks R
Electronics Forum | Thu Jul 31 14:07:44 EDT 2014 | kurtiss
I found a bad solenoid and replaced it solenoid 15 on station 11. The machine is still erroring out. I also checked the holders and sensors and they seem to be ok. This error occurs when ever the machine tries to change nozzle sizes on any holder. T
Electronics Forum | Thu May 19 08:28:08 EDT 2005 | geb
Thanks for everyones help. I have resolved this by filling all but one of the nozzle holders in nozzle changer banks.
Electronics Forum | Mon Feb 05 12:57:35 EST 2007 | cyber_wolf
Take the nozzles out and let the indicator tip touch the metal face the nozzle pushes up into. This will tell you whether the variation is in the shaft or the nozzles. Also while your indicator is touching the holder, manually grab the shaft assy a
Electronics Forum | Fri Aug 01 09:21:28 EDT 2014 | jimmyboz
Does it error during nozzle center check, if so, manually switch all holders to small, try center again. It should do about 8 small nozzle centers before error, if so this helps rule out the 10th station, if not check the 10th.
Electronics Forum | Tue Jul 05 10:27:34 EDT 2005 | GEB
The nozzles are brand new too (got them friday). 08MPF (0.08") is their part number. I tried using the air kiss feature in the setup mode and found that it blew the nozzle off the nozzle holder, not sure if this is ment to happen in this mode, but t
Electronics Forum | Fri Aug 05 16:42:12 EDT 2016 | jdengler
When the clutch engages the nozzle correctly does it clear the engagement sensor at the end of the brake arm? I don't remember the actual name of this sensor but it clears when the drive gear properly engages the nozzle. This ensures a zero setting
