Electronics Forum | Tue Jul 05 10:27:34 EDT 2005 | GEB
The nozzles are brand new too (got them friday). 08MPF (0.08") is their part number. I tried using the air kiss feature in the setup mode and found that it blew the nozzle off the nozzle holder, not sure if this is ment to happen in this mode, but t
Electronics Forum | Fri Aug 05 16:42:12 EDT 2016 | jdengler
When the clutch engages the nozzle correctly does it clear the engagement sensor at the end of the brake arm? I don't remember the actual name of this sensor but it clears when the drive gear properly engages the nozzle. This ensures a zero setting
Electronics Forum | Wed Mar 02 10:49:45 EST 2005 | Dave Erbst
Try checking your Z height and also make sure that they are cleaned regularly. If the Z height is off your will be pressing your nozzles into the holders thereby causing them to bind up inside the holder. Replace the springs periodically since they d
Electronics Forum | Fri Mar 12 23:05:37 EST 1999 | Joe Cameron
Has anyone got problems with their Fuji CP6* holders sticking and not indexing the nozzles? We find about 2 or 3 holders seizing up on us every two weeks or so. It's really frustrating, not to mention the damage it can cause on the machine and the
Electronics Forum | Wed Mar 20 15:01:37 EDT 2024 | linux
Reboot usually does the trick, Reason for these fault, (1) Nozzle holder, the grippers are holding the nozzle too tight, stretch the spring slightly, (2) shaft is sticking, removed the head lubricate the shaft.(3) Nest not opening and closed within t
Electronics Forum | Mon Mar 07 18:41:13 EST 2005 | jimmyb
--IE, Funny.--- I "remember" kinda, from the early CP6 years, things about the springs. The early Fuji springs had sharp ends, and if you spun the nozzle, prior to final attachment, the opposite way it could stick, and if it was spun the right way,
Electronics Forum | Sun Sep 11 07:16:31 EDT 2011 | smellew
We are using Fuji CP iv-3 and keep getting > "Nozzle size alarm and Nozzle position error." I > was wondering what is wrong and how do I fix > these errors? > > Thanks > We are using Fuji CP iv-3 and keep getting > "Nozzle size alarm and Nozzl
Electronics Forum | Tue Jan 17 03:36:10 EST 2012 | ngineer
RLM, Thanks for the info. I have a few more questions for you or anyone. The plugs I have don't fit the way you say, in fact, exactly the opposite. I probably should have checked better, prior to asking, but at first glance it looked like they
Electronics Forum | Tue Feb 15 06:53:50 EST 2005 | cyber_wolf
It seems that every time we do maintenance on our CP6 windmills, we have a lot of problems with nozzles sticking up inside the holders. It seems to happen for a while, then it goes away after we run for a bit. We follow the Fuji maintenance procedure
Electronics Forum | Tue Mar 25 05:35:58 EDT 2008 | fujillews
Hi We have large stocks of New Fuji Spare parts for all types CP2-7,IP1-3,QP1-3, XP & NXT. We have the parts you are looking for. see Alternativesmt.com for information or contact me on Llew@alternativesmt.com
