Electronics Forum | Thu Mar 27 14:03:03 EDT 2008 | vikkaraja
Thank you all for your help,but my boss could not wait any longer. He ordered from Fuji.
Electronics Forum | Sun Jul 11 21:10:27 EDT 2010 | fujiphil
First, check the sensors for 17th and 19th station....tune the sensor amplifier if necessary. Then, check the dogs on the nozzle holders... If the above, items are ok... check the 13th station clutch engagement. Calibrate if necessary... fujiphil
Electronics Forum | Wed Feb 29 10:00:48 EST 2012 | cyber_wolf
In order to clean the clutches properly, you must disassemble them. Did you do that ? The nozzle holder sensor dogs must be clean and scratch free.
Electronics Forum | Wed May 15 05:31:26 EDT 2013 | mhkhan_hal
Pick & Place machine,Europlacer Progress-6 is under breakdown. The machine is not showing any error message on the screen. We found that vacuum is getting generated in the machine, but it is not available at Nozzle holder. Kindly advise how to resol
Electronics Forum | Mon Nov 29 11:25:44 EST 2021 | surfacemountprocess
Hi, What spares do you need? We have stock of control/power cards, motors, nozzle holders, electrical test spares ... Please send email to surfacemountprocess@gmail.com
Electronics Forum | Mon Jul 04 11:32:44 EDT 2005 | geb
One of my Universal GSM (1995/ 1996 model) pick and place machines has recently started to drop the nozzle on the reject belt when dropping off a rejected component. I have tried replacing the nozzel holders on the ends of the spindles but with no im
Electronics Forum | Thu Jul 31 08:46:16 EDT 2014 | kurtiss
We currently have a CP4-3 that is having the nozzle change alarm on different holders. there was a part found in the machine and I do not know if it is part of the machine or not, see picture. Any advice on what this part is or how to resolve this is
Electronics Forum | Wed Mar 21 11:08:58 EDT 2018 | spoiltforchoice
Get them to > quote individual feeder and nozzle prices too so > you know what you are committed to going forward. Amen to that, I took the phrase very affordable wrt essemtec nozzles and bits at face value until I came to want some more, and OMG
Electronics Forum | Tue May 15 09:01:41 EDT 2001 | davef
Stephan makes good points. While monitoring the temperature in the plant is good, it might be more appropriate to measure the temperature in the cabinet of your dispensor. A sure indicator of temperature change is process changes over time. Consid
Electronics Forum | Tue Mar 04 03:55:11 EST 2008 | aj
Hi All, I know this forum is not for spare parts but after the shock I got when I received a quote for a new CP6 nozzle head, I feel that some other company without much cash might benefit. I purchased some fuji cp4 & cp6 spares from a 2nd user dea
