Electronics Forum: cmos failure (Page 1 of 1)

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Tue Nov 10 19:31:09 EST 2020 | mikewschomisch

I have been able to manually enter CMOS info in SETUP thanks to suggestions from this forum and get past the CMOS and EEPROM failures. Now stuck "diskette error". Any key will produce the same message. Thanks.

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Tue Nov 10 19:46:13 EST 2020 | dekhead

Still t issue if yu remove FDD from boot sequence?

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Tue Nov 10 19:20:34 EST 2020 | dekhead

Can you manually enter CMOS information in Setup and boot from there?

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Tue Nov 10 21:00:41 EST 2020 | mikewschomisch

I removed the ribbon cable from the FDD and edited the setting in SETUP to "NOT Installed";. Came back with 'Diskette drive failure on drive A'. on reboot. Still shows "Diskette error" on last line. Possible HDD issue? Thanks.

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Mon Nov 09 15:44:39 EST 2020 | mikewschomisch

DEK 265LT displays CMOC is BAD: Restoring from EEPROM.... EEPROM is BAD: No Restore was made. You MUST run SETUP followed by LOCKMOS... FAILED Any help appreciated.

DEK 265 Boot Up CMOS failure EEPROM failure*

Electronics Forum | Wed Nov 11 03:36:10 EST 2020 | dekhead

Assuming you have defined HDD correctly (this is a non-standard CMOS setting), unless it is a totally dead HDD not the normal error for HDD failure. More inclined to think a CPU issue, I have not seen a "bad EEPROM" on that machine before... but pres

Low Voltage Device damage on z18xx ICT

Electronics Forum | Wed Nov 26 07:45:24 EST 2008 | davef

Investigation of Device Damage Due to Electrical Testing, R Croughwell & J McNeill, Worcester Polytechnic Institute Abstract: This paper examines the potential failure mechanisms that can damage modern low voltage CMOS devices and their relationship

DEK 265 boot error

Electronics Forum | Thu Oct 26 12:14:34 EDT 2017 | lefwan

Our DEK 265 machine is showing this error message during starting…than it keeps re-starting in endless loops: Diskette drive failure on drive A Fixed Disk Controller Failure Fast ready check - Version 1.0 Copyright Arcom Control Systems Ltd. CMOS

Papers Listed In Library Download Poorly

Electronics Forum | Thu Jun 24 22:22:06 EDT 1999 | Dave F

Problems with downloading papers from the library not withstanding, downloading other papers in the library is problematic, as follows: Understanding SP440 Heating & Vacuum Functions Credit/ Source: LEO HUERTA, TECHNICAL SERVICES ENGINEER Works fi

  1  

cmos failure searches for Companies, Equipment, Machines, Suppliers & Information

2024 Eptac IPC Certification Training Schedule

High Precision Fluid Dispensers
Sell Used SMT & Test Equipment

High Throughput Reflow Oven
Circuit Board, PCB Assembly & electronics manufacturing service provider

World's Best Reflow Oven Customizable for Unique Applications
Best SMT Reflow Oven

High Resolution Fast Speed Industrial Cameras.