Electronics Forum | Tue May 19 10:28:51 EDT 2020 | smtmartin100
Hi, Our assembly process involves applying Kapton tape to the back side of our device, a laborious cutting and sticking operation. We are scaling up from "cottage industry" so I'm interested to know if you can buy Kapton shapes on a reel cut to our s
Electronics Forum | Wed Mar 01 13:06:36 EST 2000 | Graham Naisbitt
$100K for a full in-line. We can do conventional spray at 30 to 50% less but you must mask components you don't want to coat. If they are on 1 end only of the board, then dip coat which is the least expensive option starting at around $12K for up to
Electronics Forum | Wed Mar 01 13:06:36 EST 2000 | Graham Naisbitt
$100K for a full in-line. We can do conventional spray at 30 to 50% less but you must mask components you don't want to coat. If they are on 1 end only of the board, then dip coat which is the least expensive option starting at around $12K for up to
Electronics Forum | Sat May 29 10:32:23 EDT 2010 | isd_jwendell
I use 3M 218 fine line masking tape for masking SR conformal coating.
Electronics Forum | Wed Aug 24 09:03:44 EDT 2005 | PWH
Does anyone know of a company that cuts kapton masking to desired shape per Gerber Data for conformal coat masking applications? (Preferably Pacific Northwest Region).
Electronics Forum | Mon Aug 04 15:27:44 EDT 2003 | A
FYI: Nordson lover. Asymtek is a Nordson company. The Nordson SelectCoat is on the Asymtek web site
Electronics Forum | Mon Jun 18 14:03:04 EDT 2001 | csullivan
Thank you very much for your help!
Electronics Forum | Wed Aug 04 14:43:06 EDT 2004 | Marian Hargis
You an also look at Kinnarney Rubber Company: http://www.kinnarney.com
Electronics Forum | Wed Aug 24 16:07:27 EDT 2005 | PWH
Thanks much. Will try...
Electronics Forum | Thu Mar 21 18:06:07 EDT 2013 | caurbach
Thanks Rob and Patrick for your input.
winsouce.jpg)
