Electronics Forum | Wed Aug 01 02:17:00 EDT 2001 | djarvis
Anyone placing micro,mini,midi spring inductors (as can be seen on http://www.coilcraft.com) with an FV7100? I can get the little suckers to "test" all day long, but soon as I go into production mode the vision system rejects around 20%. I've tried c
Electronics Forum | Tue Feb 28 22:45:09 EST 2023 | kumarb
Thanks guys. Chatted with Ekra (Irv / Rudi) and we have nailed it down to the table LEFT side motor and it is specifically the coupler. As I turn the coupler by hand, there is some internal component under the coiled spring that makes a snapping soun
Electronics Forum | Tue Feb 15 20:59:16 EST 2005 | ashley
Hello Snr Tech, kindly isolate the problem if it's coming from the indentified holder or the nozzles itself, by swapping between holders. there will be oxidisation on aluminium, from which your nozzles are made after a period of time. impurities, sr
Electronics Forum | Sun Feb 27 17:06:18 EST 2005 | Darby
This is the profile we came up with on a 1500 to satisfy the parameters suggested by Indium. This was on an FR4 1mm thick 4 layer pcb that I would descrbe as medium density, QFP, SOP, AL-CAP, TANTS, D-PAK, MINI SPRING COIL, SOT and CHIPS were all use
| 1 |
