Electronics Forum | Thu May 13 09:47:32 EDT 2004 | Lubo
We are looking for a inspection system to check the positioning of a component over a PCB. We need it positioned both in X Y directions and height above PCB (it is a TH component) to be within certain limits. PLS advise can this be achived by AOI. Wh
Electronics Forum | Mon Mar 29 15:15:17 EST 1999 | twinston
Does anyone know of a contract manufacturing house that can guarantee smt component placement and can verify placement of +/-.015? Thanks in advance
Electronics Forum | Mon Sep 26 18:53:30 EDT 2016 | chabscan
Could it be possible in my Quad 4c, to increase component size tolerance to reduce the rejection of components? Could this have an impact in the event of the machine picking a component off center? As in if the machine picks a compnent off center but
Electronics Forum | Tue Sep 27 11:43:32 EDT 2016 | tnisbet
Yes you can open the tolerance, and that’ll usually work for a bit. Is the LAE is linked to multiple parts? If so, then the easiest thing is to open the tolerance. If not, that’ll require another route to try. Is it happening to all of the components
Electronics Forum | Mon May 07 10:42:09 EDT 2012 | saju86ece
Hi, I need one clarification about solder paste printing height tolerance. How to define and fix the solder paste height tolerance after screen printing for inspection purpose. Currently we are using 5mils thickness of stencil, in that we are gave
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Mon Mar 29 15:16:30 EST 1999 | twinston
| Does anyone know of a contract manufacturing house that can guarantee smt component placement and can verify placement of +/-.0015? | | Thanks in advance |
Electronics Forum | Mon Mar 29 15:39:47 EST 1999 | Stefan Witte
| Does anyone know of a contract manufacturing house that can guarantee smt component placement and can verify placement of +/-.015? | | Thanks in advance | There may be several contract manufacturing houses with .015 capability and automatic opt
Electronics Forum | Thu Apr 12 16:55:58 EDT 2018 | esoderberg
I require component engineering to spec in multi vendor parts as long as the following exists 1.Mechanical +/- 15% 2. Same orientation in pocket 3. Same pocket dimensions I have to beat the engineering a few times per year but I think they have the
Electronics Forum | Tue Mar 30 22:43:36 EST 1999 | dean
| Does anyone know of a contract manufacturing house that can guarantee smt component placement and can verify placement of +/-.015? | | Thanks in advance | Question: mm, inches, or mils? I can do it. However, what is your reliability level? 9
