Electronics Forum | Wed Jan 26 21:23:51 EST 2000 | Dennis
Hello! all Will anybody give me advice for missing componets for 0402, 0603 R or C chips? I am not gonna tell you which machine I use, but from my experience, every p&p machine has possibility for missing component after placing 400 or more componen
Electronics Forum | Wed Jan 26 21:38:53 EST 2000 | Dave F
Dennis: I cast my vote for: poor maintenance. Ta Dave F
Electronics Forum | Thu Jan 27 10:22:21 EST 2000 | JAX
Dennis, Not sure why your so secrative about what machine but I guess it doesn't matter. When you start placing 0402 & 0603 packages the difference between height and width and length gets lost in tolerance. This allows the machine to pass parts t
Electronics Forum | Thu Jan 27 19:14:27 EST 2000 | Dennis
Thanks! It is right that solder paste is somewhat responsible for misssing components in our case. I took a look at the board after placement and I found that component hit the paste, but no where on the board. I guesss dry solder paste (operater pri
Electronics Forum | Thu Jan 27 07:18:14 EST 2000 | Christopher Lampron
Dennis, The solder paste is responsible for holding the component in place pre-reflow. Several things to look at: Is the paste accurately printed on the pad? If not, there may not be enough of the component in contact with the paste to provide adiq
Electronics Forum | Tue Aug 08 14:07:59 EDT 2006 | Chunks
Tell him what he's won Ron!
Electronics Forum | Mon Aug 07 21:59:10 EDT 2006 | davef
It's inductor [choke] number 511. Probably used for EMI suppression on the monitor line. Look here: * http://www.antennex.com/shack/Dec99/beads.htm * http://lists.contesting.com/_topband/1998-11/msg00165.html *
Electronics Forum | Wed Aug 09 09:56:49 EDT 2006 | russ
Can you see the little dots on top of part? there should be three colored dots. If you can see then that tells you the value. Russ
Electronics Forum | Thu Aug 10 15:14:53 EDT 2006 | slthomas
Do we know how this part was damaged? Hopefully the issue will be resolved before placing the new part.
Electronics Forum | Mon Aug 07 19:41:24 EDT 2006 | Ron
I have a PC graphics card that has a damaged component and I have no clue what it is. The other two that look identical are black flat top with which looks like a mini copper coil in the middle and two leads on each side. They are the last componen
