Electronics Forum | Thu Apr 12 01:23:04 EDT 2001 | Eric C
Check the pad size. I had this issue before due to the pad size too wide. R&D had change the size of the pad and is solve the issue. Before the pad size change, I had rebuild another stencil with the pad opening close to the component size. It won't
Electronics Forum | Thu Mar 25 09:27:08 EDT 2010 | stepheniii
Thanks I guess I got used to google where the "and" is implied. I searched various combinations and all I could find were threads regarding the pcb's not the components. Does anyone bake their boards after wash before second reflow because of MSD c
Electronics Forum | Wed Aug 30 14:57:43 EDT 2000 | John Thorup
Hello Craig Are code dates other than these two coming apart or do they stay together? If other dates stay together you should get together with RFM. Did the process work before and and the defects just start happening? These are pictured on the RFM
Electronics Forum | Wed Sep 12 21:16:23 EDT 2001 | raton
The quip; All you can get! By the way, worthy answers above, especially Dave F getting a little tied up is good to see, he's always on the money otherwise. But seriously, watch for damage to other components. Example; thru hole's such as radial c
Electronics Forum | Wed Jan 17 10:14:37 EST 2007 | slthomas
2-3mm would seem close enough to affect the air flow and I was thinking it could be displacing the qfn. However, if you ran a failed board back through reflow and it was functional after that, I'd put my money on insufficient reflow. I suppose it's
Electronics Forum | Mon Feb 21 08:39:10 EST 2005 | pemnut
There are so many variables to this. It could be paste, pad size, contaminated components-pads, placement speed, component thickness being wrong in the program, dropping parts into the paste instead of placing them, component recognition ploblems. Is
Electronics Forum | Wed Jun 12 22:35:03 EDT 2002 | jkhiew
We had alot of problem with melf diode short together after reflow soldering. The clearance is about 0.8mm & we used "v" shaped opening . PLease comment !
Electronics Forum | Tue Aug 07 08:20:47 EDT 2001 | CPI
Are there other components on the board? If so, how does solder quality look on them? Are they all reflowing? Are the sections of the uBGA�s sitting on a ground plane? Sounds like un-even heating. You should attach a couple thermal couples and see h
Electronics Forum | Fri Sep 07 14:09:57 EDT 2001 | aqueous
Hi Carol, Pressure requirements have changed over the past few years. In the recent past, aqueous cleaning systems relied on high flow, low pressure �flooding� techniques. 20 � 30 PSI pumped through large orifice nozzles. With ever increasing boa
Electronics Forum | Fri Jan 12 19:49:07 EST 2007 | stepheniii
I think she might be more on track about the air flow. I would think they not only have thermal mass but also emit thermal energy well which would add to the dificutly of removing them. I think a Dpak would have more local thermal mass than the shie