Electronics Forum | Thu May 10 10:27:29 EDT 2001 | davef
It depends ... * Components stored in a garage in Chiriqui,Panama will have a different shelf life than those store in a climate controlled room in Ayrshire, Scotland. * Components from a reputable supplier will likely have a different shelf life tha
Electronics Forum | Mon Sep 13 10:39:50 EDT 2004 | Marie
Suggest looking at the packaging,is it sufficient to prevent damage to the QFP?. What way are these components stored when received?.Are the reels stored in boxes or racks?.Storage in boxes may cause damage from stacking the reels on top of each oth
Electronics Forum | Tue Dec 31 10:17:12 EST 2019 | emeto
Let's stay away from the PCB and process for a while. This component is pre-tinned. What kind of solder? How is the component stored? I bet you that you can put just flux on the board and solder this part - have you tried? I think we should understan
Electronics Forum | Tue Jan 16 01:37:09 EST 2007 | grantp
Hi, If you need to get a humidity target, the best way is to run the air conditioning plant very cold, which will drop the moisture out of the air, and then you can reheat to the required temp, and install humidifiers to re humidify the air to the r
Electronics Forum | Fri Sep 23 12:11:54 EDT 2005 | DasonC
If you can, store the excess components in a dry box which can maintain below 5%.
Electronics Forum | Thu Feb 09 01:52:35 EST 2023 | sophyluo1985
YES, the role of the drying cabinet is to protect those electronic components, so that there is no need to seal the electronic components. As long as you keep the drying cabinet working properly, your electronic components can be stored indefinitely
Electronics Forum | Mon Jan 15 21:54:19 EST 2007 | raychamp007
Dear Friend, Our SMT Production & component ware house RH currently control limit set to 40%RH - 60%RH, but not always achievable, the RH reading measurement are between 38%RH -65%RH. J-STD-001D recommend 30%RH - 70%RH. However it is only a recommen
Electronics Forum | Mon Mar 22 16:29:42 EDT 2021 | dan_ems
Hello, can anyone help me with a visual dump activation solution for all components? The purpose is to store many images of the components locally during assembly. Thanks!
Electronics Forum | Tue Jan 23 12:22:12 EST 2007 | Grant
Hi, I ran a clean room once, and the humidifiers were built into the exit air ducts, and controlled by a humidity control unit that kept things at 60%. We were loading VHS tapes, and needed to keep humidity at that level or static discharges caused
Electronics Forum | Tue Sep 12 19:36:17 EDT 2006 | davef
We've been soldering leadfree components for maybe 15 years. We'd be surprised not to be able to store components for at least a year, not that we purposely do that. Component fabricator process determine the maximum storage time for components. M
winsouce.jpg)