Electronics Forum | Tue Oct 01 08:35:03 EDT 2019 | robl
For brush and dip coating we are using professional fume cabinets - https://monmouthscientific.co.uk/products/fume-cupboards/ 1.8m sized.
Electronics Forum | Wed Oct 09 16:19:54 EDT 2019 | cbart
We have draft/vent booths for our folks, we had a local company here make them for us with Black lights built in. they work nicely there is a constant draw. We also had the same company build drying cabinets, they have constant draw/ventilation on th
Electronics Forum | Mon May 24 19:31:55 EDT 2010 | jry74
Can anyone give me suggestions on tape used for masking. Of course, I am looking for the "perfect tape" that sticks well, is flexible, offers lubricity for rubbing the tape, does not leave adhesive, easily removed for demasking, and won't leacvh any
Electronics Forum | Thu May 27 15:59:30 EDT 2010 | mikesewell
ATS-667 tape. You can buy direct http://www.ats24.com/index.cfm?fuseaction=content.display&contentid=50 or through distribution such as All-Spec. Polyester film with rubber resin adhesive (no silicone) = clean mask lines. Call for a sample.
Electronics Forum | Sun May 30 09:17:24 EDT 2010 | davef
We use 3M Scotch #42 tape For more look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=57849
Electronics Forum | Fri Jul 14 07:11:46 EDT 2023 | ysundar71
Can any one suggest for Masking tape with ESD Compliance.. to be used for conformal coating process
Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH
Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.
Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith
I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con
Electronics Forum | Thu Dec 12 10:42:52 EST 2002 | Adam
Guys Does anyone have any bright ideas with regards to masking a PLCC socket with via holes directly below the socket, prior to conformal coating ? We've tryed kapton tape and peelable masks but not with desirable results. Our coating process is a t
Electronics Forum | Thu Jan 30 15:41:52 EST 2003 | MikeF
The easy part is to determine which parts should be coated. The harder part is making sure the parts that should not be coated do not get coated. I don't even want to think about the amount of labor and materials I've lost due to conformal coat get
