Electronics Forum | Fri Jul 23 15:55:34 EDT 2004 | t.burnette
try dynasolve. http://dynaloy.com/tech_data_sheets/Dynasolve%20218%20PDF.pdf
Electronics Forum | Fri Jul 23 08:58:11 EDT 2004 | RDC
I know Micro Care made a unit that removed conformal coating with compressed air and a solvent. But they no longer make it. Does anyone have the 2000 version of this unit and may want to sell it or know of another compressed air solvent solution, p
Electronics Forum | Fri Jan 25 15:51:26 EST 2013 | johng
Water soluble process, yes. The machine is old and fixed at 4 ft/min by someone way before me. Looking into ways to reverse that to allow for adjusting the conveyor. Trying to determine how the contamination gets onto the boards. So far testing has i
Electronics Forum | Fri Jan 25 12:15:04 EST 2013 | johng
I'm using urethane conformal coat and have fisheyes and dewetting after coating even though the PWAs have been through the wash cycle twice. I'm looking at using Ionox 13302 in an ultrasonic cleaner as a short term solution until root cause can be id
Electronics Forum | Fri Jan 25 12:14:18 EST 2013 | johng
I'm using urethane conformal coat and have fisheyes and dewetting after coating even though the PWAs have been through the wash cycle twice. I'm looking at using Ionox 13302 in an ultrasonic cleaner as a short term solution until root cause can be id
Electronics Forum | Wed Jul 20 15:18:35 EDT 2005 | FW
Hi! We have both Dip & Spray conformal coating processes & have never done any kind of baking before the process! I am assuming the reason for baking would be the same - ie, remove any moisture on the brds since moisture will create failure of the co
Electronics Forum | Fri Apr 21 17:46:29 EDT 2006 | SD
First of all, do not use kapton tape! It tends to cause a dewetting effect around the tape. A call to Humiseal will explain why. There's not really a blanket answer to your question.... Removing cured liquid mask can often result in a fillet ef
Electronics Forum | Tue Jan 30 20:38:32 EST 2007 | davef
NASA Internal Advisory: NASA-Issued Return to Flight Wristbands Contaminated with Silicone [snip] 10. PROBLEM DESCRIPTION: Recently we have been made aware of a silicone problem associated with the "Return to Flight" wristbands. These wristbands are
Electronics Forum | Wed Sep 21 09:07:49 EDT 2016 | johnb1712
We are looking for advice on removal of BGA components once urethane conformal coating has been applied and cured.
Electronics Forum | Wed Mar 04 08:32:45 EST 2020 | stephendo
We bought a conformal coating removal machine AKA a sand blaster at an auction. It is a CCR2000 especially made to be ESD safe. Does anyone have any experience with sandblasting conformal coating? We mostly use humiseal 1A33 and UV40. When we use the
