Electronics Forum | Tue May 19 11:56:59 EDT 2020 | philc
Do you buy in the PCB's from a manufacturer? If so, they may well offer such a service for you. We get quite a few different boards that come with either Kapton tape, or liquid masking already applied.
Electronics Forum | Tue May 19 10:28:51 EDT 2020 | smtmartin100
Hi, Our assembly process involves applying Kapton tape to the back side of our device, a laborious cutting and sticking operation. We are scaling up from "cottage industry" so I'm interested to know if you can buy Kapton shapes on a reel cut to our s
Electronics Forum | Fri May 29 14:34:37 EDT 2020 | huske
BEST Inc offers this type of product for custom shape cutouts. You can buy standard circles and squares from many places. soldertools.net/conformal-coating-tapeshapes-laser-cut-3m-type-401-engineering-cad-work/ solder.net/painters-tape-cus
Electronics Forum | Fri Apr 21 17:46:29 EDT 2006 | SD
First of all, do not use kapton tape! It tends to cause a dewetting effect around the tape. A call to Humiseal will explain why. There's not really a blanket answer to your question.... Removing cured liquid mask can often result in a fillet ef
Electronics Forum | Thu Dec 12 10:42:52 EST 2002 | Adam
Guys Does anyone have any bright ideas with regards to masking a PLCC socket with via holes directly below the socket, prior to conformal coating ? We've tryed kapton tape and peelable masks but not with desirable results. Our coating process is a t
Electronics Forum | Wed Aug 24 09:03:44 EDT 2005 | PWH
Does anyone know of a company that cuts kapton masking to desired shape per Gerber Data for conformal coat masking applications? (Preferably Pacific Northwest Region).
Electronics Forum | Tue Jan 27 07:10:06 EST 2004 | Rob O
Try using Kapton Tape or masking tape dots instead of the liquid mask.
Electronics Forum | Mon Jul 23 16:21:54 EDT 2007 | mleber
We have used many ways of measuring but all are either messy, inconsistent or time consuming. We have done wet, glass slide dry, etc. We are currently using a kapton tape dot system. Spray the board, remove the dot and measure it, subtract the thick
Electronics Forum | Fri May 14 11:17:42 EDT 2004 | Ashok Dhawan
I am having coating adhesion problem with flex circuits. The cover plate material is KAPTON or Poly imide. The conformal coating material used is humiseal 2A64. The boards are cleaned, measuring less than 4 microgram Nacl per sq in. against acceptabl
Electronics Forum | Tue Mar 19 13:32:21 EDT 2013 | rgduval
In the past, I've used kapton tape for masking, as well as masking tape and solder mask as you've described. I've also used dummy connectors, or connector caps to cover connectors/pins. In the end, though, I'm not sure any of these methods decrea
.gif)
