Electronics Forum | Mon Apr 17 14:43:35 EDT 2017 | davef
Measurement of Conformal Coating thickness on Printed Circuit Boards [ http://www.defelsko.com/applications/conformal-coating/printed-circuit-boards.htm ] I receive no benefit from the supplier mentioned above. IPC-HDBK-830A, 8.11.1 talks to measu
Electronics Forum | Thu Jan 04 17:26:17 EST 2001 | Cory
We're going to begin conformal coating a few of our assemblies as required by our customer. We're using Kester No clean paste and will use cotton gloves to keep the boards clean while handling. My question is: Do we need to clean the boards prior to
Electronics Forum | Thu May 17 15:17:42 EDT 2001 | blnorman
Parylene is arguable the best conformal coating there is, unfortunately it's also the most expensive. We had considered using it some time back, but due to environmental and safety issues, we would have had to build a new building to house the proce
Electronics Forum | Tue Nov 05 17:00:40 EST 2002 | MikeF
Does anyone know of a good basic conformal coat training class for operators? Or can anyone recommend a company that offers a conformal coat training class, in the US? We want to add more capability to our operations, and have stumbled a bit in our
Electronics Forum | Fri Sep 09 15:03:46 EDT 2005 | Amol
Hi, I am running a circuit board that needs a part to be put on it after cleaning and before conformal coating. the only problem is that after cleaning and hand assembly of the part, there is a thin whitish residue in the ckt board that one can see w
Electronics Forum | Fri Jan 26 13:26:30 EST 2007 | rw
We are developing a new product that requires conformal coating on the motor controller. We selected a silicone based conformal coat due to its ease of use. There has been disagreement among engineers as to its impact on the motor. We have contact
Electronics Forum | Tue Mar 04 10:42:45 EST 2008 | operator
We have a product that requires labeling and serial numbers that obviousely should be put on prior to conformal coating. 1.What kind of labels/ink/sharpe can be used under conformal coating without disolving etc...? We will be using Techspray 2103-1
Electronics Forum | Tue Apr 07 15:36:15 EDT 2009 | gtemkin
Most of the conformal coating manufacturers recommend verifying the compatibility of their coating with the solder mask, so it's no surprise that occassionally there will be such issues. Are you sure your conformal coat is completely cured? If your
.png)
