Electronics Forum | Tue Mar 01 03:17:40 EST 2022 | gary_sastrillas
Hi Guys, did anyone here selling the old siplace pro 7 up server with licenses Siplace Pro Server and Machine Connections License.
Electronics Forum | Tue Feb 07 12:55:24 EST 2023 | sandima
is there any convenient way to understand which pins are connected on RS232 without removing the connectors? thanks for the reply @MagyarT
Electronics Forum | Tue Feb 28 12:26:35 EST 2023 | erikfriesen
While perhaps not your problem, I found an unsoldered connection on my E1. It had worked for 20 years until I bought it. If you have a manual, try tracing the related connections if you have a resident troubleshooter.
Electronics Forum | Thu Aug 01 19:47:13 EDT 2024 | SMTA-68146200
Thanks for your reply. My customer is telling me that once he touched it up and made a connection to the sides, he got a good signal. Is it possible that the connection underneath was poor? If so, what might be the cause of that?
Electronics Forum | Thu Sep 06 10:58:49 EDT 2001 | davef
If your words imaged correctly, it seems a bit strange to have a trace that is wider than the pad where it connects, because we�re used to seeing a narrower trace connecting to a wider pad. It�s tough to determine what the designer was thinking abou
Electronics Forum | Fri Apr 23 16:36:27 EDT 2004 | davef
Comments. Comments. Hell yeh, we got comments!!! You are correct to question the appearance of this solder connection. Based on your description, it's defective. Well at best, it's VERY suspect. That's the rule. If it's suspect, question it.
Electronics Forum | Fri Aug 13 09:09:11 EDT 2004 | davef
Solderability standards are: * IPC EIA J-STD-002B - Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires * IPC EIA J-STD-003A - Solderability Tests for Printed Boards Not intending to insult you, but terms used to descr
Electronics Forum | Thu Aug 20 15:10:21 EDT 2009 | davef
Responding to your points: * The intermettalic layers [ie, Cu6Sn5, Cu3Sn] between the solder and the copper pad is the same composition with both lead free and leaded solder. The lead in solder has no impact on the intermetallic. * As you say, increa
Electronics Forum | Fri Mar 27 12:46:23 EDT 2020 | unisoft
Unisoft has been import gerber only for years to setup assembly, aoi machines, etc. *** Help for Importing GERBER only files for used in programming Assembly, AOI, Test, Selective Soldering machines (X/Y Center, Rot, Part#). Also allows you to cre
Electronics Forum | Sun Sep 03 10:05:36 EDT 2017 | unisoft
Hi Unisoft's ProntoGERBER-CONNECTION should help you. ( http://www.unisoft-cim.com/gerber_connection.htm ) -------------- ProntoGERBER-CONNECTION ( http://www.unisoft-cim.com/gerber_connection.htm ) imports raw Gerber data and allows the user to ad