Electronics Forum | Wed Dec 04 04:28:58 EST 2019 | oxygensmd
It seems there isn't right connection between solder and solder-legs. Maybe check that the LEDs get huminidity, have some oxidation on the legs, try different solder paste, check the reflow solder profile. On the photo I can not saw properly reflowe
Electronics Forum | Fri Jan 17 11:40:36 EST 2020 | davef
Try preheating the connectors
Electronics Forum | Thu Jan 16 05:10:46 EST 2020 | soupy
Hej, we have some connectors placed on our PCB. 2*30legs 0.5 After reflow we detect lifted legs in the AOI. Always on the outer corners. Is this something ye have experienced? And any possible solutions? Stuff we have tried: Checking the cop
Electronics Forum | Fri Jan 17 02:29:59 EST 2020 | soupy
Thanks Dave, We have avoided rotating the board as it is so long but we will test. Maybe we will to try screen it in one direction and then rotate it before the oven. We have the maximum solder we can get there at the moment. The reflow engineer
Electronics Forum | Thu Jan 16 10:07:12 EST 2020 | davef
Hej back at ya Your connectors could be warping during reflow. Find out by putting a connector on a hot plate and increasing the temperature. If so, you might get away with a simple fix of rotating the board 90* on your reflow oven conveyor. If you
Electronics Forum | Tue Dec 03 18:51:57 EST 2019 | kylehunter
Hi all, We are having a confusing defect with one of our client's boards. It is a large board, 30" x 12". The client supplies the LEDs, they are cheap overseas diodes, and it is not uncommon to have reels with the packaging torn. We have w
Electronics Forum | Mon Apr 06 11:46:10 EDT 2009 | c111
I agree the longer soak will help provided you are not applying to much heat/time to the board now. -are the pads that lift connected to anything? This has happened to me in the past where un-connected pads would come of far easier than those connec
Electronics Forum | Sun May 30 08:50:42 EDT 1999 | Dave F
| Yes l know this problem keeps cropping up on the forum but l've missed some of the follow-ups. | | Our problem is that the lifting only occurs on 3% of production so actually detecting an improvement is difficult. We're actually having to inspect
Electronics Forum | Sat Aug 11 05:29:31 EDT 2007 | johnz
We are having a problem with JST connector ICM-MA50H-SS52-1161 LF SN. After reflow oven soldering we have mostly problem with soldering quality for firs or last leg of the connector. (There is no connection- leg just lays-lift on the solder no wicki
Electronics Forum | Tue Jun 27 09:12:15 EDT 2000 | james liang
hello all, DSS Model of cordless phone base unit during process TOP - REFLOW- FCT - BOTTOM - REFLOW - Wave solder and then the IC101 leg of RF unit lifted..?
