Electronics Forum | Tue Nov 14 18:55:16 EST 2023 | kghadiya
I relate to your problem. We face this issue sometimes. It's mostly flux from SMT, TH process or rework boards. To avoid foam in our Washer, we soak the boards in hot water for 10-15 min before running it through the washer. Or you can spray the boar
Electronics Forum | Sat Mar 21 09:09:40 EDT 2009 | davef
Your puzzlement about blowholes in PTH solder connections during reflow soldering comes from: * Boards are hydroscopic. So, moisture content of the board is uniform. * Gold plating is uniform. * Nickle plating is uniform. * Copper plating on your PTH
Electronics Forum | Tue Jul 28 14:34:47 EDT 1998 | upinder singh
Hello everybody. Remember I posted some questions on the smtnet regarding placing the thru hole connector using paste and reflow(pin in hole). I have able to accomplish the process succcesfully.....but I have a problem. The boards are failing at the
Electronics Forum | Wed Jul 29 17:39:40 EDT 1998 | David Spilker
| Hello everybody. | Remember I posted some questions on the smtnet regarding placing the thru hole connector using paste and reflow(pin in hole). I have able to accomplish the process succcesfully.....but I have a problem. The boards are failing at
Electronics Forum | Tue Jul 28 16:13:45 EDT 1998 | Steve Gregory
| Hello everybody. | Remember I posted some questions on the smtnet regarding placing the thru hole connector using paste and reflow(pin in hole). I have able to accomplish the process succcesfully.....but I have a problem. The boards are failing at
Electronics Forum | Mon Feb 24 15:19:30 EST 2014 | bc
I work with after market cell phones and I need to figure out a robust way to protect the board to board connectors during the vapor deposition process (paralyne). Does anyone have experience with masking and paralyne?
Electronics Forum | Wed Jun 29 12:04:29 EDT 2022 | kumarb
Hi. Alpha metals recently informed us of: Alpha OM-565 low temp solder which they note is popular with pin-in-paste process of through hole parts so that we can solder inside of our SMT oven (1809EXL). We commonly use ROHS DSUB connectors (9 to 78
Electronics Forum | Thu Jun 30 12:21:33 EDT 2022 | kumarb
Thanks. Yes, we have attempted to use standard ROHS profiles in the past and turned our THT connectors into 'chucky dolls' after the PCBA left the oven. We then realized that we need the high temp nylon connectors to allow for the use inside the SMT
Electronics Forum | Fri Sep 06 14:03:18 EDT 2013 | horchak
If you are a CEM you are setting yourself up for failure and will be left holding the bag. Flash gold has one purpose. It is a protective coating for the base medal to keep it from oxidizing. It is very thin and will be absorbed into the solder joint
Electronics Forum | Thu Jun 20 03:29:56 EDT 2002 | Josef
I would like to ask you for help. We use mixed technology and we need to protect SMT components in double Wave. Currently we use the carrier for protection of this component. In this case this procces is not possible to use it due to gap between SMT
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
