Electronics Forum | Wed Nov 07 10:59:55 EST 2001 | paulburt
Hello all, I have been tasked with bringing my company up to spec with J-STD-033, yes lucky me! My question is this: While I was searching the Web for suitable suppliers of dry cabinets I came across a company advertising a humidity control system f
Electronics Forum | Fri Mar 30 07:14:42 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Fri Mar 30 07:14:51 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Thu Mar 29 10:51:47 EST 2001 | Deon Nungaray
Hello Phil, AOI equipment has been around for a number of years. I remember evaluating a machine around 5 years ago. At this time the system was not able to learn right side up or upside down characters. Well, the newer systems have come a long way.
Electronics Forum | Mon Aug 27 16:13:35 EDT 2001 | seand
Hello Everyone, For QC purposes, there are a couple of methods to both qaulitatively and quantitatively inspect your manufacturing process. For Paste inspcetion, an inline machine like the SE300 by CyberOptics may be appropriate. You may also inco
Electronics Forum | Mon Mar 31 15:13:40 EDT 2014 | rangarajd
We are trying to setup a closed loop humidity control system that will maintain the RH at about 45% on our 24,000 Sq ft factory. Can we just these systems spray city water or does it have to be DI or treated water? Thanks!
Electronics Forum | Mon Nov 25 16:46:17 EST 2002 | timreisenleiter
Any experience with the Conceptronic freedom-2000/HGR2000 system? I have the opportunity to pick one up for about 15k USD. The system new is approximately 51K, putting it into the high end of BGA/CSP/chip-scale rework systems, the specs. are really h
Electronics Forum | Wed Apr 02 05:31:45 EDT 2014 | jdumont
We have four or five of these guys scattered around our 40,000sqft plant spraying DI water. They have a not so accurate built in humidistat but its good enough and they aren't that expensive for upfront cost. Just lube the packing washers in the gun
Electronics Forum | Wed Apr 02 09:45:25 EDT 2014 | swag
Not sure what kind of humidifier you are looking at but here's my experience: We have 4 humidifiers. All are ultrasonic supplied with DI water. They work well but... UT humidifiers will create a foggy white residue that will stick to things in cl
Electronics Forum | Thu Feb 26 16:49:57 EST 1998 | specnor tecnic corp
we have some rebuilt wave soldering systems in stock ready to be shipped. epk-ii smt with lambda wave, chip wave ,omega wave. 4 preheaters,jacking stand roll out computer control. machine is in a great shape. another machin upk15f with 6 preheaters
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
